diff --git a/arduino/Doorsensor_Dohle/doorsensor/doorsensor.ino b/arduino/Doorsensor_Dohle/doorsensor/doorsensor.ino new file mode 100644 index 0000000..9966798 --- /dev/null +++ b/arduino/Doorsensor_Dohle/doorsensor/doorsensor.ino @@ -0,0 +1,96 @@ +#define MY_DEBUG +#define MY_RADIO_NRF24 +#define MY_NODE_ID 5 + +#define CHILD_ID_DOOR 1 +#define CHILD_ID_VOLTAGE 2 +#define DOOR_SENSOR_PIN 3 + +int BATTERY_SENSE_PIN = A0; // select the input pin for the battery sense point + +#include +#include + + + +/**************************************************/ +/****************** CONSTANTS *********************/ +/**************************************************/ + +static const uint64_t UPDATE_INTERVAL = 1800000; +int oldBatteryPcnt = 0; +int oldValue = 0; +float VBAT_PER_BITS = 0.0032551319648094; +float VMIN = 1.9; +float VMAX = 3.24; + +/**************************************************/ +/****************** VARIABLES *********************/ +/**************************************************/ + + +/**************************************************/ +/****************** MESSAGES **********************/ +/**************************************************/ + + +MyMessage msgDoor(CHILD_ID_DOOR,V_TRIPPED); +MyMessage msgVBat(CHILD_ID_VOLTAGE,V_CUSTOM); + + +void presentation() +{ +present(CHILD_ID_DOOR, S_DOOR); +} + + +void setup() +{ + +// use the 1.1 V internal reference +#if defined(__AVR_ATmega2560__) + analogReference(INTERNAL1V1); +#else + analogReference(INTERNAL); +#endif + +pinMode(DOOR_SENSOR_PIN,INPUT); +} + + +void loop() +{ + sleep(digitalPinToInterrupt(DOOR_SENSOR_PIN),CHANGE, UPDATE_INTERVAL); + motion_on(); + getBatteryLevel(); +} + + + +/**************************************************/ +/**************** AUX. FUNCTIONS ******************/ +/**************************************************/ +void getBatteryLevel() +{ + // Battery monitoring reading + int sensorValue = analogRead(BATTERY_SENSE_PIN); + delay(500); + + // Calculate the battery in % + float Vbat = sensorValue * VBAT_PER_BITS; + send(msgVBat.set(Vbat, 3)); + int batteryPcnt = static_cast(((Vbat - VMIN) / (VMAX - VMIN))*100.); + + if (batteryPcnt > 100) { + batteryPcnt = 100; + } + + sendBatteryLevel(batteryPcnt); +} + +void motion_on() +{ + + bool tripped = digitalRead(DOOR_SENSOR_PIN) == LOW; + send(msgDoor.set(tripped?"0":"1")); // Send tripped value to gw +} diff --git a/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/CONTRIBUTING.md b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/CONTRIBUTING.md new file mode 100644 index 0000000..6e01919 --- /dev/null +++ b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/CONTRIBUTING.md @@ -0,0 +1 @@ +MySensors Code Contribution Guidelines diff --git a/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/doxygen.sh b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/doxygen.sh new file mode 100644 index 0000000..8fcf4de --- /dev/null +++ b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/doxygen.sh @@ -0,0 +1,23 @@ +#!/bin/bash +## Invoke from project root, e.g Documentation/doxygen.sh + +# Generate doxygen file for Raspberry Pi configure command +echo -e "/**\n * @defgroup RaspberryPiGateway Raspberry Pi Gateway\n * @ingroup MyConfigGrp\n * @brief Configuration options for the Raspberry Pi Gateway\n@{\n@verbatim" > configure.h +./configure --help >> configure.h +echo -e "@endverbatim\n@}*/\n" >> configure.h + +# Generate version information +export PROJECTNUMBER=$(git fetch --tags; git describe --tags;) + +# Generate any UML diagrams in the code tree that has the proper tags +export PLANTUML_JAR_PATH=Documentation/plantuml.jar +java -Djava.awt.headless=true -jar $PLANTUML_JAR_PATH -failfast2 -nbthread auto -o "$PWD/Documentation/img" "./**.(c|cpp|dox|h|hpp|ino)" + +# Launch Doxygen (assumed to be in the PATH) +doxygen + +# Show any warnings created +cat doxygen.log + +# Clean up autogenerated (temporary) artifacts +rm configure.h diff --git a/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/html/fonts/KGSecondChancesSketch.ttf b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/html/fonts/KGSecondChancesSketch.ttf new file mode 100644 index 0000000..8b7ce1c Binary files /dev/null and b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/html/fonts/KGSecondChancesSketch.ttf differ diff --git a/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/html/fonts/KGSecondChancesSolid.ttf b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/html/fonts/KGSecondChancesSolid.ttf new file mode 100644 index 0000000..f89610f Binary files /dev/null and b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/html/fonts/KGSecondChancesSolid.ttf differ diff --git a/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/html/fonts/RobotoCondensed-Regular-webfont.eot b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/html/fonts/RobotoCondensed-Regular-webfont.eot new file mode 100644 index 0000000..5710fe6 Binary files /dev/null and b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/html/fonts/RobotoCondensed-Regular-webfont.eot differ diff --git a/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/html/fonts/RobotoCondensed-Regular-webfont.svg b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/html/fonts/RobotoCondensed-Regular-webfont.svg new file mode 100644 index 0000000..0ce4985 --- /dev/null +++ b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/html/fonts/RobotoCondensed-Regular-webfont.svg @@ -0,0 +1,644 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + \ No newline at end of file diff --git a/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/html/fonts/RobotoCondensed-Regular-webfont.ttf b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/html/fonts/RobotoCondensed-Regular-webfont.ttf new file mode 100644 index 0000000..be9f6f8 Binary files /dev/null and b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/html/fonts/RobotoCondensed-Regular-webfont.ttf differ diff --git a/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/html/fonts/RobotoCondensed-Regular-webfont.woff b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/html/fonts/RobotoCondensed-Regular-webfont.woff new file mode 100644 index 0000000..ec28f95 Binary files /dev/null and b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/html/fonts/RobotoCondensed-Regular-webfont.woff differ diff --git a/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/html/fonts/RobotoCondensed-Regular.ttf b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/html/fonts/RobotoCondensed-Regular.ttf new file mode 100644 index 0000000..65bf32a Binary files /dev/null and b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/html/fonts/RobotoCondensed-Regular.ttf differ diff --git a/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/html/fonts/kgsecondchancessketch-webfont.eot b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/html/fonts/kgsecondchancessketch-webfont.eot new file mode 100644 index 0000000..ad31298 Binary files /dev/null and b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/html/fonts/kgsecondchancessketch-webfont.eot differ diff --git a/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/html/fonts/kgsecondchancessketch-webfont.svg b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/html/fonts/kgsecondchancessketch-webfont.svg new file mode 100644 index 0000000..6dac65a --- /dev/null +++ b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/html/fonts/kgsecondchancessketch-webfont.svg @@ -0,0 +1,668 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + \ No newline at end of file diff --git a/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/html/fonts/kgsecondchancessketch-webfont.ttf b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/html/fonts/kgsecondchancessketch-webfont.ttf new file mode 100644 index 0000000..a792e7f Binary files /dev/null and b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/html/fonts/kgsecondchancessketch-webfont.ttf differ diff --git a/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/html/fonts/kgsecondchancessketch-webfont.woff b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/html/fonts/kgsecondchancessketch-webfont.woff new file mode 100644 index 0000000..172cd2e Binary files /dev/null and b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/html/fonts/kgsecondchancessketch-webfont.woff differ diff --git a/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/html/fonts/kgsecondchancessolid-webfont.eot b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/html/fonts/kgsecondchancessolid-webfont.eot new file mode 100644 index 0000000..b4f1cee Binary files /dev/null and b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/html/fonts/kgsecondchancessolid-webfont.eot differ diff --git a/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/html/fonts/kgsecondchancessolid-webfont.svg b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/html/fonts/kgsecondchancessolid-webfont.svg new file mode 100644 index 0000000..e35fc12 --- /dev/null +++ b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/html/fonts/kgsecondchancessolid-webfont.svg @@ -0,0 +1,668 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + \ No newline at end of file diff --git a/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/html/fonts/kgsecondchancessolid-webfont.ttf b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/html/fonts/kgsecondchancessolid-webfont.ttf new file mode 100644 index 0000000..a341142 Binary files /dev/null and b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/html/fonts/kgsecondchancessolid-webfont.ttf differ diff --git a/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/html/fonts/kgsecondchancessolid-webfont.woff b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/html/fonts/kgsecondchancessolid-webfont.woff new file mode 100644 index 0000000..84ccb67 Binary files /dev/null and b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/html/fonts/kgsecondchancessolid-webfont.woff differ diff --git a/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/img/MySigning/alicenbob.png b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/img/MySigning/alicenbob.png new file mode 100644 index 0000000..1fb1d70 Binary files /dev/null and b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/img/MySigning/alicenbob.png differ diff --git a/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/img/MySigning/alicenfriends.png b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/img/MySigning/alicenfriends.png new file mode 100644 index 0000000..9267043 Binary files /dev/null and b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/img/MySigning/alicenfriends.png differ diff --git a/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/img/MySigning/alicenfriends2.png b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/img/MySigning/alicenfriends2.png new file mode 100644 index 0000000..84f6cb5 Binary files /dev/null and b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/img/MySigning/alicenfriends2.png differ diff --git a/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/img/MySigning/signingillustrated1.png b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/img/MySigning/signingillustrated1.png new file mode 100644 index 0000000..37657c7 Binary files /dev/null and b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/img/MySigning/signingillustrated1.png differ diff --git a/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/img/MySigning/signingillustrated2.gif b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/img/MySigning/signingillustrated2.gif new file mode 100644 index 0000000..0a57659 Binary files /dev/null and b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/img/MySigning/signingillustrated2.gif differ diff --git a/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/img/MySigning/signingillustrated2.png b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/img/MySigning/signingillustrated2.png new file mode 100644 index 0000000..d9ff1bd Binary files /dev/null and b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/img/MySigning/signingillustrated2.png differ diff --git a/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/img/MySigning/signingsequence.png b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/img/MySigning/signingsequence.png new file mode 100644 index 0000000..ecf83bb Binary files /dev/null and b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/img/MySigning/signingsequence.png differ diff --git a/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/img/MySigning/wiring.png b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/img/MySigning/wiring.png new file mode 100644 index 0000000..0dd4dc2 Binary files /dev/null and b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/img/MySigning/wiring.png differ diff --git a/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/img/logo.png b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/img/logo.png new file mode 100644 index 0000000..d352c92 Binary files /dev/null and b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/img/logo.png differ diff --git a/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/mainpage.dox b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/mainpage.dox new file mode 100644 index 0000000..9cc8d29 --- /dev/null +++ b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/mainpage.dox @@ -0,0 +1,44 @@ +/** +@mainpage MySensors library and examples documentation + +Are you a sketch developer/user, see @ref publics + +Are you a core/library developer, see @ref internals + +@copyright (C) 2013-2018 Sensnology AB + +Full contributor list: https://github.com/mysensors/MySensors/graphs/contributors +*/ + +/* + * Doxygen groups that are spread across files/sections + */ +/** + * @defgroup publics MySensors public APIs and functionalities + * @brief The public APIs and functionalities are directly accessible to sketch developers/users. + * + * @defgroup internals MySensors internal APIs and functionalities + * @brief The interal APIs and functionalities should only be used by library developers/advanced + * users. + * +*/ + +/** + * @defgroup MyConfigGrp Library customisation + * @ingroup publics + * + * @brief The MySensors library can be customized in various ways. + * + * All customizations are set in the sketch. @note It is important to define any customizations + * before including the primary library header. @see MySensors.h + */ +/** + * @defgroup memorysavings Tips for reducing memory footprint + * @ingroup MyConfigGrp + * + * @brief Some settings are optional but add significantly to the memory footprint size. + * + * By disabeling optional features that you don't need you can save memory which can be a valuable + * resource on cheaper hardware like the atmega328p. + * These options can be defined in your sketch to disable such features. + */ diff --git a/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/plantuml.jar b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/plantuml.jar new file mode 100644 index 0000000..9528a42 Binary files /dev/null and b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/plantuml.jar differ diff --git a/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/styles/DoxygenLayout.xml b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/styles/DoxygenLayout.xml new file mode 100644 index 0000000..c78dd40 --- /dev/null +++ b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/styles/DoxygenLayout.xml @@ -0,0 +1,194 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/styles/html/footerFile.html b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/styles/html/footerFile.html new file mode 100644 index 0000000..6413607 --- /dev/null +++ b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/styles/html/footerFile.html @@ -0,0 +1,20 @@ + + + + + + +
+Copyright (C) 2013-2018 Sensnology AB. $generatedby doxygen + $doxygenversion +
+ + + diff --git a/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/styles/html/headerFile.html b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/styles/html/headerFile.html new file mode 100644 index 0000000..7a0adcb --- /dev/null +++ b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/styles/html/headerFile.html @@ -0,0 +1,55 @@ + + + + + + + +$projectname: $title +$title + + + +$treeview +$search +$mathjax + +$extrastylesheet + + +
+ + +
+ + + + + + + + + + + + + + + + + + + + + +
+
$projectname +  $projectnumber +
+
$projectbrief
+ 		+
$projectbrief
+ 		$searchbox
+
+ + diff --git a/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/styles/html/styleSheetFile.css b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/styles/html/styleSheetFile.css new file mode 100644 index 0000000..1a03d1c --- /dev/null +++ b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Documentation/styles/html/styleSheetFile.css @@ -0,0 +1,1430 @@ +/* MySensors doxygen style sheet */ +@font-face { + font-family: kg_second_chances_sketchRg; + src: url(fonts/kgsecondchancessketch-webfont.eot); + src: url(fonts/kgsecondchancessketch-webfont.eot?#iefix) format('embedded-opentype'), + url(fonts/kgsecondchancessketch-webfont.woff) format('woff'), + url(fonts/kgsecondchancessketch-webfont.ttf) format('truetype'), + url(fonts/kgsecondchancessketch-webfont.svg#kg_second_chances_sketchRg) format('svg') +} + +@font-face { + font-family: kg_second_chances_solidRg; + src: url(fonts/kgsecondchancessolid-webfont.eot); + src: url(fonts/kgsecondchancessolid-webfont.eot?#iefix) format('embedded-opentype'), + url(fonts/kgsecondchancessolid-webfont.woff) format('woff'), + url(fonts/kgsecondchancessolid-webfont.ttf) format('truetype'), + url(fonts/kgsecondchancessolid-webfont.svg#kg_second_chances_solidRg) format('svg') +} + +@font-face { + font-family: roboto_condensed_regular; + src: url(fonts/RobotoCondensed-Regular-webfont.eot); + src: url(fonts/RobotoCondensed-Regular-webfont.eot?#iefix) format('embedded-opentype'), + url(fonts/RobotoCondensed-Regular-webfont.woff) format('woff'), + url(fonts/RobotoCondensed-Regular-webfont.ttf) format('truetype'), + url(fonts/RobotoCondensed-Regular-webfont.svg#roboto_condensed_regular) format('svg'); +} + +body, table, div, p, dl { + font-family: roboto_condensed_regular; + font-size: 16px; + color: #333; +} + +/* @group Heading Levels */ + +h1.groupheader { + font-size: 32px; +} + +.title { + font: 400 16px/38px kg_second_chances_sketchRg; + font-size: 2.3em; + font-weight: normal; + margin: 10px 2px; +} + +h2.groupheader { + border-bottom: 1px solid #333; + color: #333; +} + +h3.groupheader { + font-size: 100%; +} + +h1, h2, h3, h4, h5, h6 { + font-family: kg_second_chances_solidRg; + font-weight: normal; +} + +dt { + font-weight: bold; +} + +div.multicol { + -moz-column-gap: 1em; + -webkit-column-gap: 1em; + -moz-column-count: 3; + -webkit-column-count: 3; +} + +p.startli, p.startdd { + margin-top: 2px; +} + +p.starttd { + margin-top: 0px; +} + +p.endli { + margin-bottom: 0px; +} + +p.enddd { + margin-bottom: 4px; +} + +p.endtd { + margin-bottom: 2px; +} + +/* @end */ + +caption { + font-weight: bold; +} + +span.legend { + font-size: 70%; + text-align: center; +} + +h3.version { + font-size: 90%; + text-align: center; +} + +div.qindex, div.navtab{ + background-color: #EBEFF6; + border: 1px solid #A3B4D7; + text-align: center; +} + +div.qindex, div.navpath { + width: 100%; + line-height: 140%; +} + +div.navtab { + margin-right: 15px; +} + +/* @group Link Styling */ + +a { + color: #337ab7; + text-decoration: none; +} + +.contents a:visited { + color: #337ab7; +} + +.contents a:hover { + color: #23527c; + text-decoration: none +} + +a.qindex { + font-weight: bold; +} + +a.qindexHL { + font-weight: bold; + background-color: #9CAFD4; + color: #ffffff; + border: 1px double #869DCA; +} + +.contents a.qindexHL:visited { + color: #ffffff; +} + +a.el { + font-weight: normal; +} + +a.elRef { +} + +a.code, a.code:visited, a.line, a.line:visited { + color: #4665A2; +} + +a.codeRef, a.codeRef:visited, a.lineRef, a.lineRef:visited { + color: #4665A2; +} + +/* @end */ + +dl.el { + margin-left: -1cm; +} + +pre.fragment { + background-color: #f8f8f8; + border: 1px solid #ccc; + font-size: 13px; + line-height: 19px; + overflow: auto; + padding: 6px 10px; + border-radius: 3px; + font-family: Menlo,Monaco,Consolas,Courier New,monospace; +} + +div.fragment { + background-color: #f8f8f8; + border: 1px solid #ccc; + font-size: 13px; + line-height: 19px; + overflow: auto; + padding: 6px 10px; + border-radius: 3px; + font-family: Menlo,Monaco,Consolas,Courier New,monospace; +} + +div.line { + font-family: monospace, fixed; + font-size: 13px; + min-height: 13px; + line-height: 1.0; + text-wrap: unrestricted; + white-space: -moz-pre-wrap; /* Moz */ + white-space: -pre-wrap; /* Opera 4-6 */ + white-space: -o-pre-wrap; /* Opera 7 */ + white-space: pre-wrap; /* CSS3 */ + word-wrap: break-word; /* IE 5.5+ */ + text-indent: -53px; + padding-left: 53px; + padding-bottom: 0px; + margin: 0px; + -webkit-transition-property: background-color, box-shadow; + -webkit-transition-duration: 0.5s; + -moz-transition-property: background-color, box-shadow; + -moz-transition-duration: 0.5s; + -ms-transition-property: background-color, box-shadow; + -ms-transition-duration: 0.5s; + -o-transition-property: background-color, box-shadow; + -o-transition-duration: 0.5s; + transition-property: background-color, box-shadow; + transition-duration: 0.5s; +} + +div.line.glow { + background-color: cyan; + box-shadow: 0 0 10px cyan; +} + + +span.lineno { + padding-right: 4px; + text-align: right; + border-right: 2px solid #0F0; + background-color: #E8E8E8; + white-space: pre; +} +span.lineno a { + background-color: #D8D8D8; +} + +span.lineno a:hover { + background-color: #C8C8C8; +} + +div.ah { + background-color: black; + font-weight: bold; + color: #ffffff; + margin-bottom: 3px; + margin-top: 3px; + padding: 0.2em; + border: solid thin #333; + border-radius: 0.5em; + -webkit-border-radius: .5em; + -moz-border-radius: .5em; + box-shadow: 2px 2px 3px #999; + -webkit-box-shadow: 2px 2px 3px #999; + -moz-box-shadow: rgba(0, 0, 0, 0.15) 2px 2px 2px; + background-image: -webkit-gradient(linear, left top, left bottom, from(#eee), to(#000),color-stop(0.3, #444)); + background-image: -moz-linear-gradient(center top, #eee 0%, #444 40%, #000); +} + +div.groupHeader { + margin-left: 16px; + margin-top: 12px; + font-weight: bold; +} + +div.groupText { + margin-left: 16px; + font-style: italic; +} + +body { + background-color: white; + color: black; + margin: 0; +} + +div.contents { + margin-top: 10px; + margin-left: 12px; + margin-right: 8px; +} + +td.indexkey { + background-color: #EBEFF6; + font-weight: bold; + border: 1px solid #C4CFE5; + margin: 2px 0px 2px 0; + padding: 2px 10px; + white-space: nowrap; + vertical-align: top; +} + +td.indexvalue { + background-color: #EBEFF6; + border: 1px solid #C4CFE5; + padding: 2px 10px; + margin: 2px 0px; +} + +tr.memlist { + background-color: #EEF1F7; +} + +p.formulaDsp { + text-align: center; +} + +img.formulaDsp { + +} + +img.formulaInl { + vertical-align: middle; +} + +div.center { + text-align: center; + margin-top: 0px; + margin-bottom: 0px; + padding: 0px; +} + +div.center img { + border: 0px; +} + +address.footer { + text-align: right; + padding-right: 12px; +} + +img.footer { + border: 0px; + vertical-align: middle; +} + +/* @group Code Colorization */ + +span.keyword { + color: #008000 +} + +span.keywordtype { + color: #604020 +} + +span.keywordflow { + color: #e08000 +} + +span.comment { + color: #800000 +} + +span.preprocessor { + color: #806020 +} + +span.stringliteral { + color: #002080 +} + +span.charliteral { + color: #008080 +} + +span.vhdldigit { + color: #ff00ff +} + +span.vhdlchar { + color: #000000 +} + +span.vhdlkeyword { + color: #700070 +} + +span.vhdllogic { + color: #ff0000 +} + +blockquote { + background-color: #F7F8FB; + border-left: 2px solid #9CAFD4; + margin: 0 24px 0 4px; + padding: 0 12px 0 16px; +} + +/* @end */ + +/* +.search { + color: #003399; + font-weight: bold; +} + +form.search { + margin-bottom: 0px; + margin-top: 0px; +} + +input.search { + font-size: 75%; + color: #000080; + font-weight: normal; + background-color: #e8eef2; +} +*/ + +td.tiny { + font-size: 75%; +} + +.dirtab { + padding: 4px; + border-collapse: collapse; + border: 1px solid #A3B4D7; +} + +th.dirtab { + background: #EBEFF6; + font-weight: bold; +} + +hr { + height: 0px; + border: none; + border-top: 1px solid #4A6AAA; +} + +hr.footer { + height: 1px; +} + +/* @group Member Descriptions */ + +table.memberdecls { + border-spacing: 0px; + padding: 0px; +} + +.memberdecls td, .fieldtable tr { +/* + -webkit-transition-property: background-color, box-shadow; + -webkit-transition-duration: 0.5s; + -moz-transition-property: background-color, box-shadow; + -moz-transition-duration: 0.5s; + -ms-transition-property: background-color, box-shadow; + -ms-transition-duration: 0.5s; + -o-transition-property: background-color, box-shadow; + -o-transition-duration: 0.5s; + transition-property: background-color, box-shadow; + transition-duration: 0.5s; +*/ +} + +.memberdecls td.glow, .fieldtable tr.glow { + background-color: none; + box-shadow: none; +} + +.mdescLeft, .mdescRight, +.memItemLeft, .memItemRight, +.memTemplItemLeft, .memTemplItemRight, .memTemplParams { + background-color: #F9FAFC; + border: none; + margin: 4px; + padding: 1px 0 0 8px; +} + +.mdescLeft, .mdescRight { + padding: 0px 8px 4px 8px; + color: #555; +} + +.memSeparator { + border-bottom: 1px solid #DEE4F0; + line-height: 1px; + margin: 0px; + padding: 0px; +} + +.memItemLeft, .memTemplItemLeft { + white-space: nowrap; +} + +.memItemRight { + width: 100%; +} + +.memTemplParams { + color: #4665A2; + white-space: nowrap; + font-size: 80%; +} + +/* @end */ + +/* @group Member Details */ + +/* Styles for detailed member documentation */ + +.memtemplate { + font-size: 80%; + color: #4665A2; + font-weight: normal; + margin-left: 9px; +} + +.memnav { + background-color: #EBEFF6; + border: 1px solid #A3B4D7; + text-align: center; + margin: 2px; + margin-right: 15px; + padding: 2px; +} + +.mempage { + width: 100%; +} + +.memitem { + padding: 0; + margin-bottom: 10px; + margin-right: 5px; + -webkit-transition: box-shadow 0.5s linear; + -moz-transition: box-shadow 0.5s linear; + -ms-transition: box-shadow 0.5s linear; + -o-transition: box-shadow 0.5s linear; + transition: box-shadow 0.5s linear; + display: table !important; + width: 100%; +} + +.memitem.glow { + box-shadow: 0 0 15px cyan; +} + +.memname { + font-weight: bold; + margin-left: 6px; +} + +.memname td { + vertical-align: bottom; +} + +.memproto, dl.reflist dt { + border-top: 1px solid #A8B8D9; + border-left: 1px solid #A8B8D9; + border-right: 1px solid #A8B8D9; + padding: 6px 0px 6px 0px; + color: #253555; + font-weight: bold; + text-shadow: 0px 1px 1px rgba(255, 255, 255, 0.9); + background-image:url('nav_f.png'); + background-repeat:repeat-x; + background-color: #E2E8F2; + /* opera specific markup */ + box-shadow: 5px 5px 5px rgba(0, 0, 0, 0.15); + border-top-right-radius: 4px; + border-top-left-radius: 4px; + /* firefox specific markup */ + -moz-box-shadow: rgba(0, 0, 0, 0.15) 5px 5px 5px; + -moz-border-radius-topright: 4px; + -moz-border-radius-topleft: 4px; + /* webkit specific markup */ + -webkit-box-shadow: 5px 5px 5px rgba(0, 0, 0, 0.15); + -webkit-border-top-right-radius: 4px; + -webkit-border-top-left-radius: 4px; + +} + +.memdoc, dl.reflist dd { + border-bottom: 1px solid #A8B8D9; + border-left: 1px solid #A8B8D9; + border-right: 1px solid #A8B8D9; + padding: 6px 10px 2px 10px; + background-color: #FBFCFD; + border-top-width: 0; + background-image:url('nav_g.png'); + background-repeat:repeat-x; + background-color: #FFFFFF; + /* opera specific markup */ + border-bottom-left-radius: 4px; + border-bottom-right-radius: 4px; + box-shadow: 5px 5px 5px rgba(0, 0, 0, 0.15); + /* firefox specific markup */ + -moz-border-radius-bottomleft: 4px; + -moz-border-radius-bottomright: 4px; + -moz-box-shadow: rgba(0, 0, 0, 0.15) 5px 5px 5px; + /* webkit specific markup */ + -webkit-border-bottom-left-radius: 4px; + -webkit-border-bottom-right-radius: 4px; + -webkit-box-shadow: 5px 5px 5px rgba(0, 0, 0, 0.15); +} + +dl.reflist dt { + padding: 5px; +} + +dl.reflist dd { + margin: 0px 0px 10px 0px; + padding: 5px; +} + +.paramkey { + text-align: right; +} + +.paramtype { + white-space: nowrap; +} + +.paramname { + color: #602020; + white-space: nowrap; +} +.paramname em { + font-style: normal; +} +.paramname code { + line-height: 14px; +} + +.params, .retval, .exception, .tparams { + margin-left: 0px; + padding-left: 0px; +} + +.params .paramname, .retval .paramname { + font-weight: bold; + vertical-align: top; +} + +.params .paramtype { + font-style: italic; + vertical-align: top; +} + +.params .paramdir { + font-family: monospace, fixed; + vertical-align: top; +} + +table.mlabels { + border-spacing: 0px; +} + +td.mlabels-left { + width: 100%; + padding: 0px; +} + +td.mlabels-right { + vertical-align: bottom; + padding: 0px; + white-space: nowrap; +} + +span.mlabels { + margin-left: 8px; +} + +span.mlabel { + background-color: #728DC1; + border-top:1px solid #5373B4; + border-left:1px solid #5373B4; + border-right:1px solid #C4CFE5; + border-bottom:1px solid #C4CFE5; + text-shadow: none; + color: white; + margin-right: 4px; + padding: 2px 3px; + border-radius: 3px; + font-size: 11pt; + white-space: nowrap; + vertical-align: middle; +} + + + +/* @end */ + +/* these are for tree view when not used as main index */ + +div.directory { + margin: 10px 0px; + border-top: 1px solid #A8B8D9; + border-bottom: 1px solid #A8B8D9; + width: 100%; +} + +.directory table { + border-collapse:collapse; +} + +.directory td { + margin: 0px; + padding: 0px; + vertical-align: top; +} + +.directory td.entry { + white-space: nowrap; + padding-right: 6px; + padding-top: 3px; +} + +.directory td.entry a { + outline:none; +} + +.directory td.entry a img { + border: none; +} + +.directory td.desc { + width: 100%; + padding-left: 6px; + padding-right: 6px; + padding-top: 3px; + border-left: 1px solid rgba(0,0,0,0.05); +} + +.directory tr.even { + padding-left: 6px; + background-color: #F7F8FB; +} + +.directory img { + vertical-align: -30%; +} + +.directory .levels { + white-space: nowrap; + width: 100%; + text-align: right; + font-size: 9pt; +} + +.directory .levels span { + cursor: pointer; + padding-left: 2px; + padding-right: 2px; + color: #3D578C; +} + +div.dynheader { + margin-top: 8px; + -webkit-touch-callout: none; + -webkit-user-select: none; + -khtml-user-select: none; + -moz-user-select: none; + -ms-user-select: none; + user-select: none; +} + +address { + font-style: normal; + color: #2A3D61; +} + +table.doxtable { + border-collapse:collapse; + margin-top: 4px; + margin-bottom: 4px; +} + +table.doxtable td { + font-weight: normal; + border: 1px solid #ccc; + padding: 6px 13px; + text-align: left; + margin: 0; +} + +table.doxtable th { + font-weight: 700; + border: 1px solid #ccc; + color: #333; + background-color: white; + padding: 6px 13px; + text-align: left; + margin: 0; +} + +table.doxtable tr { + border-top: 1px solid #ccc; + background-color: white; + margin: 0; + padding: 0; +} + +table.doxtable tr:nth-child(2n+1) { + background-color: #f8f8f8; +} + +table.fieldtable { + /*width: 100%;*/ + margin-bottom: 4px; + border: 1px solid #ccc; + border-spacing: 0px; + -moz-border-radius: 0px; + -webkit-border-radius: 0px; + border-radius: 0px; + -moz-box-shadow: none; + -webkit-box-shadow: none; + box-shadow: none; +} + +table.directory { + font: 400 14px roboto_condensed_regular; +} + +.fieldtable td, .fieldtable th { + padding: 6px 13px; + border: 1px solid #ccc; + text-align: left; + margin: 0; + font-weight: normal; +} + +.fieldtable td.fieldtype, .fieldtable td.fieldname { + white-space: nowrap; + border-right: 1px solid #ccc; + border-bottom: 1px solid #ccc; + vertical-align: top; +} + +/* +.fieldtable td.fieldname { + padding-top: 3px; +} + +.fieldtable td.fielddoc { + border-bottom: 1px solid #ccc; + width: 100%; +} + +.fieldtable td.fielddoc p:first-child { + margin-top: 0px; +} + +.fieldtable td.fielddoc p:last-child { + margin-bottom: 2px; +} + +.fieldtable tr:last-child td { + border-bottom: none; +} +*/ + +.fieldtable tr:nth-child(2n+1) { + background-color: #f8f8f8; +} + +.fieldtable th { + font-weight: 700; + border: 1px solid #ccc; + color: #333; + background-color: white; + padding: 6px 13px; + text-align: left; + margin: 0; + background-image:none; +/*background-repeat:repeat-x; + background-color: #E2E8F2;*/ + -moz-border-radius-topleft: 0px; + -moz-border-radius-topright: 0px; + -webkit-border-top-left-radius: 0px; + -webkit-border-top-right-radius: 0px; + border-top-left-radius: 0px; + border-top-right-radius: 0px; + border-bottom: 1px solid #ccc; +} + + +.tablist a { + color: #333; + font-family: roboto_condensed_regular; + display: block; + padding: 0 20px; + font-weight: normal; + font-size: 16px; + text-shadow: none; + text-decoration: none; + outline: none; +} + +.tabsearch { + top: 0px; + left: 10px; + height: 36px; + background-image: url('tab_b.png'); + z-index: 101; + overflow: hidden; + font-size: 13px; +} + +.navpath ul +{ + font-size: 11px; + background-image:url('tab_b.png'); + background-repeat:repeat-x; + background-position: 0 -5px; + height:30px; + line-height:30px; + color:#8AA0CC; + border:solid 1px #C2CDE4; + overflow:hidden; + margin:0px; + padding:0px; +} + +.navpath li +{ + list-style-type:none; + float:left; + padding-left:10px; + padding-right:15px; + background-image:url('bc_s.png'); + background-repeat:no-repeat; + background-position:right; + color:#364D7C; +} + +.navpath li.navelem a +{ + height:32px; + display:block; + text-decoration: none; + outline: none; + color: #283A5D; + font-family: roboto_condensed_regular; + text-shadow: 0px 1px 1px rgba(255, 255, 255, 0.9); + text-decoration: none; +} + +.navpath li.navelem a:hover +{ + color:#6884BD; +} + +.navpath li.footer +{ + list-style-type:none; + float:right; + padding-left:10px; + padding-right:15px; + background-image:none; + background-repeat:no-repeat; + background-position:right; + color:#364D7C; + font-size: 8pt; +} + + +div.summary +{ + float: right; + font-size: 8pt; + padding-right: 5px; + width: 50%; + text-align: right; +} + +div.summary a +{ + white-space: nowrap; +} + +div.ingroups +{ + font-size: 10pt; + width: 50%; + text-align: left; +} + +div.ingroups a +{ + white-space: nowrap; +} + +div.header +{ + background-image:url('nav_h.png'); + background-repeat:repeat-x; + background-color: #F9FAFC; + margin: 0px; + border-bottom: 1px solid #C4CFE5; +} + +div.headertitle +{ + padding: 5px 5px 5px 10px; +} + +dl +{ + padding: 0 0 0 10px; +} + +/* dl.note, dl.warning, dl.attention, dl.pre, dl.post, dl.invariant, dl.deprecated, dl.todo, dl.test, dl.bug */ +dl.section +{ + margin-left: 0px; + padding-left: 0px; +} + +dl.note +{ + margin-left:-7px; + padding-left: 3px; + border-left:4px solid; + border-color: #D0C000; +} + +dl.warning, dl.attention +{ + margin-left:-7px; + padding-left: 3px; + border-left:4px solid; + border-color: #FF0000; +} + +dl.pre, dl.post, dl.invariant +{ + margin-left:-7px; + padding-left: 3px; + border-left:4px solid; + border-color: #00D000; +} + +dl.deprecated +{ + margin-left:-7px; + padding-left: 3px; + border-left:4px solid; + border-color: #505050; +} + +dl.todo +{ + margin-left:-7px; + padding-left: 3px; + border-left:4px solid; + border-color: #00C0E0; +} + +dl.test +{ + margin-left:-7px; + padding-left: 3px; + border-left:4px solid; + border-color: #3030E0; +} + +dl.bug +{ + margin-left:-7px; + padding-left: 3px; + border-left:4px solid; + border-color: #C08050; +} + +dl.section dd { + margin-bottom: 6px; +} + + +#projectlogo +{ + text-align: center; + vertical-align: bottom; + border-collapse: separate; +} + +#projectlogo img +{ + border: 0px none; + height: 40px; + padding: 5px; +} + +#projectname +{ + font: 200% kg_second_chances_sketchRg; + margin: 0px; + padding: 2px 0px; +} + +#projectbrief +{ + font: 120% roboto_condensed_regular; + margin: 0px; + padding: 0px; +} + +#projectnumber +{ + font: 50% roboto_condensed_regular; + margin: 0px; + padding: 0px; +} + +#titlearea +{ + padding: 0px; + margin: 0px; + width: 100%; + border-bottom: 1px solid #5373B4; +} + +.image +{ + text-align: center; +} + +.dotgraph +{ + text-align: center; +} + +.mscgraph +{ + text-align: center; +} + +.diagraph +{ + text-align: center; +} + +.caption +{ + font-weight: bold; +} + +div.zoom +{ + border: 1px solid #90A5CE; +} + +dl.citelist { + margin-bottom:50px; +} + +dl.citelist dt { + color:#334975; + float:left; + font-weight:bold; + margin-right:10px; + padding:5px; +} + +dl.citelist dd { + margin:2px 0; + padding:5px 0; +} + +div.toc { + padding: 14px 25px; + background-color: #F4F6FA; + border: 1px solid #D8DFEE; + border-radius: 7px 7px 7px 7px; + float: right; + height: auto; + margin: 0 20px 10px 10px; + width: 200px; +} + +div.toc li { + background: url("bdwn.png") no-repeat scroll 0 5px transparent; + font: 10px/1.2 roboto_condensed_regular; + margin-top: 5px; + padding-left: 10px; + padding-top: 2px; +} + +div.toc h3 { + font: bold 12px/1.2 roboto_condensed_regular; + color: #4665A2; + border-bottom: 0 none; + margin: 0; +} + +div.toc ul { + list-style: none outside none; + border: medium none; + padding: 0px; +} + +div.toc li.level1 { + margin-left: 0px; +} + +div.toc li.level2 { + margin-left: 15px; +} + +div.toc li.level3 { + margin-left: 30px; +} + +div.toc li.level4 { + margin-left: 45px; +} + +.inherit_header { + font-weight: bold; + color: gray; + cursor: pointer; + -webkit-touch-callout: none; + -webkit-user-select: none; + -khtml-user-select: none; + -moz-user-select: none; + -ms-user-select: none; + user-select: none; +} + +.inherit_header td { + padding: 6px 0px 2px 5px; +} + +.inherit { + display: none; +} + +tr.heading h2 { + margin-top: 12px; + margin-bottom: 4px; +} + +/* tooltip related style info */ + +.ttc { + position: absolute; + display: none; +} + +#powerTip { + cursor: default; + white-space: nowrap; + background-color: white; + border: 1px solid gray; + border-radius: 4px 4px 4px 4px; + box-shadow: 1px 1px 7px gray; + display: none; + font-size: smaller; + max-width: 80%; + opacity: 0.9; + padding: 1ex 1em 1em; + position: absolute; + z-index: 2147483647; +} + +#powerTip div.ttdoc { + color: grey; + font-style: italic; +} + +#powerTip div.ttname a { + font-weight: bold; +} + +#powerTip div.ttname { + font-weight: bold; +} + +#powerTip div.ttdeci { + color: #006318; +} + +#powerTip div { + margin: 0px; + padding: 0px; + font: 12px/16px roboto_condensed_regular; +} + +#powerTip:before, #powerTip:after { + content: ""; + position: absolute; + margin: 0px; +} + +#powerTip.n:after, #powerTip.n:before, +#powerTip.s:after, #powerTip.s:before, +#powerTip.w:after, #powerTip.w:before, +#powerTip.e:after, #powerTip.e:before, +#powerTip.ne:after, #powerTip.ne:before, +#powerTip.se:after, #powerTip.se:before, +#powerTip.nw:after, #powerTip.nw:before, +#powerTip.sw:after, #powerTip.sw:before { + border: solid transparent; + content: " "; + height: 0; + width: 0; + position: absolute; +} + +#powerTip.n:after, #powerTip.s:after, +#powerTip.w:after, #powerTip.e:after, +#powerTip.nw:after, #powerTip.ne:after, +#powerTip.sw:after, #powerTip.se:after { + border-color: rgba(255, 255, 255, 0); +} + +#powerTip.n:before, #powerTip.s:before, +#powerTip.w:before, #powerTip.e:before, +#powerTip.nw:before, #powerTip.ne:before, +#powerTip.sw:before, #powerTip.se:before { + border-color: rgba(128, 128, 128, 0); +} + +#powerTip.n:after, #powerTip.n:before, +#powerTip.ne:after, #powerTip.ne:before, +#powerTip.nw:after, #powerTip.nw:before { + top: 100%; +} + +#powerTip.n:after, #powerTip.ne:after, #powerTip.nw:after { + border-top-color: #ffffff; + border-width: 10px; + margin: 0px -10px; +} +#powerTip.n:before { + border-top-color: #808080; + border-width: 11px; + margin: 0px -11px; +} +#powerTip.n:after, #powerTip.n:before { + left: 50%; +} + +#powerTip.nw:after, #powerTip.nw:before { + right: 14px; +} + +#powerTip.ne:after, #powerTip.ne:before { + left: 14px; +} + +#powerTip.s:after, #powerTip.s:before, +#powerTip.se:after, #powerTip.se:before, +#powerTip.sw:after, #powerTip.sw:before { + bottom: 100%; +} + +#powerTip.s:after, #powerTip.se:after, #powerTip.sw:after { + border-bottom-color: #ffffff; + border-width: 10px; + margin: 0px -10px; +} + +#powerTip.s:before, #powerTip.se:before, #powerTip.sw:before { + border-bottom-color: #808080; + border-width: 11px; + margin: 0px -11px; +} + +#powerTip.s:after, #powerTip.s:before { + left: 50%; +} + +#powerTip.sw:after, #powerTip.sw:before { + right: 14px; +} + +#powerTip.se:after, #powerTip.se:before { + left: 14px; +} + +#powerTip.e:after, #powerTip.e:before { + left: 100%; +} +#powerTip.e:after { + border-left-color: #ffffff; + border-width: 10px; + top: 50%; + margin-top: -10px; +} +#powerTip.e:before { + border-left-color: #808080; + border-width: 11px; + top: 50%; + margin-top: -11px; +} + +#powerTip.w:after, #powerTip.w:before { + right: 100%; +} +#powerTip.w:after { + border-right-color: #ffffff; + border-width: 10px; + top: 50%; + margin-top: -10px; +} +#powerTip.w:before { + border-right-color: #808080; + border-width: 11px; + top: 50%; + margin-top: -11px; +} + +@media print +{ + #top { display: none; } + #side-nav { display: none; } + #nav-path { display: none; } + body { overflow:visible; } + h1, h2, h3, h4, h5, h6 { page-break-after: avoid; } + .summary { display: none; } + .memitem { page-break-inside: avoid; } + #doc-content + { + margin-left:0 !important; + height:auto !important; + width:auto !important; + overflow:inherit; + display:inline; + } +} + diff --git a/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Doxyfile b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Doxyfile new file mode 100644 index 0000000..513899d --- /dev/null +++ b/arduino/Doorsensor_Dohle/doorsensor/libraries/MySensors/Doxyfile @@ -0,0 +1,2295 @@ +# Doxyfile 1.8.6 + +# This file describes the settings to be used by the documentation system +# doxygen (www.doxygen.org) for a project. +# +# All text after a double hash (##) is considered a comment and is placed in +# front of the TAG it is preceding. +# +# All text after a single hash (#) is considered a comment and will be ignored. +# The format is: +# TAG = value [value, ...] +# For lists, items can also be appended using: +# TAG += value [value, ...] +# Values that contain spaces should be placed between quotes (\" \"). + +#--------------------------------------------------------------------------- +# Project related configuration options +#--------------------------------------------------------------------------- + +# This tag specifies the encoding used for all characters in the config file +# that follow. The default is UTF-8 which is also the encoding used for all text +# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv +# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv +# for the list of possible encodings. +# The default value is: UTF-8. + +DOXYFILE_ENCODING = UTF-8 + +# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by +# double-quotes, unless you are using Doxywizard) that should identify the +# project for which the documentation is generated. This name is used in the +# title of most generated pages and in a few other places. +# The default value is: My Project. + +PROJECT_NAME = "MySensors Library & Examples" + +# The PROJECT_NUMBER tag can be used to enter a project or revision number. This +# could be handy for archiving the generated documentation or if some version +# control system is used. + +PROJECT_NUMBER = $(PROJECTNUMBER) + +# Using the PROJECT_BRIEF tag one can provide an optional one line description +# for a project that appears at the top of each page and should give viewer a +# quick idea about the purpose of the project. Keep the description short. + +PROJECT_BRIEF = + +# With the PROJECT_LOGO tag one can specify an logo or icon that is included in +# the documentation. The maximum height of the logo should not exceed 55 pixels +# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo +# to the output directory. + +PROJECT_LOGO = Documentation/img/logo.png + +# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path +# into which the generated documentation will be written. If a relative path is +# entered, it will be relative to the location where doxygen was started. If +# left blank the current directory will be used. + +OUTPUT_DIRECTORY = Documentation + +# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub- +# directories (in 2 levels) under the output directory of each output format and +# will distribute the generated files over these directories. Enabling this +# option can be useful when feeding doxygen a huge amount of source files, where +# putting all generated files in the same directory would otherwise causes +# performance problems for the file system. +# The default value is: NO. + +CREATE_SUBDIRS = NO + +# The OUTPUT_LANGUAGE tag is used to specify the language in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all constant output in the proper language. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. +# The default value is: English. + +OUTPUT_LANGUAGE = English + +# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member +# descriptions after the members that are listed in the file and class +# documentation (similar to Javadoc). Set to NO to disable this. +# The default value is: YES. + +BRIEF_MEMBER_DESC = YES + +# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief +# description of a member or function before the detailed description +# +# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the +# brief descriptions will be completely suppressed. +# The default value is: YES. + +REPEAT_BRIEF = YES + +# This tag implements a quasi-intelligent brief description abbreviator that is +# used to form the text in various listings. Each string in this list, if found +# as the leading text of the brief description, will be stripped from the text +# and the result, after processing the whole list, is used as the annotated +# text. Otherwise, the brief description is used as-is. If left blank, the +# following values are used ($name is automatically replaced with the name of +# the entity):The $name class, The $name widget, The $name file, is, provides, +# specifies, contains, represents, a, an and the. + +ABBREVIATE_BRIEF = + +# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then +# doxygen will generate a detailed section even if there is only a brief +# description. +# The default value is: NO. + +ALWAYS_DETAILED_SEC = NO + +# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all +# inherited members of a class in the documentation of that class as if those +# members were ordinary class members. Constructors, destructors and assignment +# operators of the base classes will not be shown. +# The default value is: NO. + +INLINE_INHERITED_MEMB = NO + +# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path +# before files name in the file list and in the header files. If set to NO the +# shortest path that makes the file name unique will be used +# The default value is: YES. + +FULL_PATH_NAMES = YES + +# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path. +# Stripping is only done if one of the specified strings matches the left-hand +# part of the path. The tag can be used to show relative paths in the file list. +# If left blank the directory from which doxygen is run is used as the path to +# strip. +# +# Note that you can specify absolute paths here, but also relative paths, which +# will be relative from the directory where doxygen is started. +# This tag requires that the tag FULL_PATH_NAMES is set to YES. + +STRIP_FROM_PATH = + +# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the +# path mentioned in the documentation of a class, which tells the reader which +# header file to include in order to use a class. If left blank only the name of +# the header file containing the class definition is used. Otherwise one should +# specify the list of include paths that are normally passed to the compiler +# using the -I flag. + +STRIP_FROM_INC_PATH = + +# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but +# less readable) file names. This can be useful is your file systems doesn't +# support long names like on DOS, Mac, or CD-ROM. +# The default value is: NO. + +SHORT_NAMES = NO + +# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the +# first line (until the first dot) of a Javadoc-style comment as the brief +# description. If set to NO, the Javadoc-style will behave just like regular Qt- +# style comments (thus requiring an explicit @brief command for a brief +# description.) +# The default value is: NO. + +JAVADOC_AUTOBRIEF = NO + +# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first +# line (until the first dot) of a Qt-style comment as the brief description. If +# set to NO, the Qt-style will behave just like regular Qt-style comments (thus +# requiring an explicit \brief command for a brief description.) +# The default value is: NO. + +QT_AUTOBRIEF = NO + +# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a +# multi-line C++ special comment block (i.e. a block of //! or /// comments) as +# a brief description. This used to be the default behavior. The new default is +# to treat a multi-line C++ comment block as a detailed description. Set this +# tag to YES if you prefer the old behavior instead. +# +# Note that setting this tag to YES also means that rational rose comments are +# not recognized any more. +# The default value is: NO. + +MULTILINE_CPP_IS_BRIEF = NO + +# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the +# documentation from any documented member that it re-implements. +# The default value is: YES. + +INHERIT_DOCS = YES + +# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a +# new page for each member. If set to NO, the documentation of a member will be +# part of the file/class/namespace that contains it. +# The default value is: NO. + +SEPARATE_MEMBER_PAGES = NO + +# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen +# uses this value to replace tabs by spaces in code fragments. +# Minimum value: 1, maximum value: 16, default value: 4. + +TAB_SIZE = 4 + +# This tag can be used to specify a number of aliases that act as commands in +# the documentation. An alias has the form: +# name=value +# For example adding +# "sideeffect=@par Side Effects:\n" +# will allow you to put the command \sideeffect (or @sideeffect) in the +# documentation, which will result in a user-defined paragraph with heading +# "Side Effects:". You can put \n's in the value part of an alias to insert +# newlines. + +ALIASES = "startuml{1}=\image html \1\n\image latex \1\n\if DontIgnorePlantUMLCode" +ALIASES += "enduml=\endif" + +# This tag can be used to specify a number of word-keyword mappings (TCL only). +# A mapping has the form "name=value". For example adding "class=itcl::class" +# will allow you to use the command class in the itcl::class meaning. + +TCL_SUBST = + +# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources +# only. Doxygen will then generate output that is more tailored for C. For +# instance, some of the names that are used will be different. The list of all +# members will be omitted, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_FOR_C = NO + +# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or +# Python sources only. Doxygen will then generate output that is more tailored +# for that language. For instance, namespaces will be presented as packages, +# qualified scopes will look different, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_JAVA = NO + +# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran +# sources. Doxygen will then generate output that is tailored for Fortran. +# The default value is: NO. + +OPTIMIZE_FOR_FORTRAN = NO + +# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL +# sources. Doxygen will then generate output that is tailored for VHDL. +# The default value is: NO. + +OPTIMIZE_OUTPUT_VHDL = NO + +# Doxygen selects the parser to use depending on the extension of the files it +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, and +# language is one of the parsers supported by doxygen: IDL, Java, Javascript, +# C#, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL. For instance to make +# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C +# (default is Fortran), use: inc=Fortran f=C. +# +# Note For files without extension you can use no_extension as a placeholder. +# +# Note that for custom extensions you also need to set FILE_PATTERNS otherwise +# the files are not read by doxygen. + +EXTENSION_MAPPING = ino=C++ + +# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments +# according to the Markdown format, which allows for more readable +# documentation. See http://daringfireball.net/projects/markdown/ for details. +# The output of markdown processing is further processed by doxygen, so you can +# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in +# case of backward compatibilities issues. +# The default value is: YES. + +MARKDOWN_SUPPORT = YES + +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by by putting a % sign in front of the word +# or globally by setting AUTOLINK_SUPPORT to NO. +# The default value is: YES. + +AUTOLINK_SUPPORT = YES + +# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want +# to include (a tag file for) the STL sources as input, then you should set this +# tag to YES in order to let doxygen match functions declarations and +# definitions whose arguments contain STL classes (e.g. func(std::string); +# versus func(std::string) {}). This also make the inheritance and collaboration +# diagrams that involve STL classes more complete and accurate. +# The default value is: NO. + +BUILTIN_STL_SUPPORT = NO + +# If you use Microsoft's C++/CLI language, you should set this option to YES to +# enable parsing support. +# The default value is: NO. + +CPP_CLI_SUPPORT = NO + +# Set the SIP_SUPPORT tag to YES if your project consists of sip (see: +# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# will parse them like normal C++ but will assume all classes use public instead +# of private inheritance when no explicit protection keyword is present. +# The default value is: NO. + +SIP_SUPPORT = NO + +# For Microsoft's IDL there are propget and propput attributes to indicate +# getter and setter methods for a property. Setting this option to YES will make +# doxygen to replace the get and set methods by a property in the documentation. +# This will only work if the methods are indeed getting or setting a simple +# type. If this is not the case, or you want to show the methods anyway, you +# should set this option to NO. +# The default value is: YES. + +IDL_PROPERTY_SUPPORT = YES + +# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC +# tag is set to YES, then doxygen will reuse the documentation of the first +# member in the group (if any) for the other members of the group. By default +# all members of a group must be documented explicitly. +# The default value is: NO. + +DISTRIBUTE_GROUP_DOC = NO + +# Set the SUBGROUPING tag to YES to allow class member groups of the same type +# (for instance a group of public functions) to be put as a subgroup of that +# type (e.g. under the Public Functions section). Set it to NO to prevent +# subgrouping. Alternatively, this can be done per class using the +# \nosubgrouping command. +# The default value is: YES. + +SUBGROUPING = YES + +# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions +# are shown inside the group in which they are included (e.g. using \ingroup) +# instead of on a separate page (for HTML and Man pages) or section (for LaTeX +# and RTF). +# +# Note that this feature does not work in combination with +# SEPARATE_MEMBER_PAGES. +# The default value is: NO. + +INLINE_GROUPED_CLASSES = NO + +# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions +# with only public data fields or simple typedef fields will be shown inline in +# the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO, structs, classes, and unions are shown on a separate page (for HTML and +# Man pages) or section (for LaTeX and RTF). +# The default value is: NO. + +INLINE_SIMPLE_STRUCTS = NO + +# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or +# enum is documented as struct, union, or enum with the name of the typedef. So +# typedef struct TypeS {} TypeT, will appear in the documentation as a struct +# with name TypeT. When disabled the typedef will appear as a member of a file, +# namespace, or class. And the struct will be named TypeS. This can typically be +# useful for C code in case the coding convention dictates that all compound +# types are typedef'ed and only the typedef is referenced, never the tag name. +# The default value is: NO. + +TYPEDEF_HIDES_STRUCT = NO + +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can be +# an expensive process and often the same symbol appears multiple times in the +# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small +# doxygen will become slower. If the cache is too large, memory is wasted. The +# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range +# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536 +# symbols. At the end of a run doxygen will report the cache usage and suggest +# the optimal cache size from a speed point of view. +# Minimum value: 0, maximum value: 9, default value: 0. + +LOOKUP_CACHE_SIZE = 0 + +#--------------------------------------------------------------------------- +# Build related configuration options +#--------------------------------------------------------------------------- + +# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in +# documentation are documented, even if no documentation was available. Private +# class members and static file members will be hidden unless the +# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES. +# Note: This will also disable the warnings about undocumented members that are +# normally produced when WARNINGS is set to YES. +# The default value is: NO. + +EXTRACT_ALL = NO + +# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will +# be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIVATE = NO + +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. +# The default value is: NO. + +EXTRACT_PACKAGE = NO + +# If the EXTRACT_STATIC tag is set to YES all static members of a file will be +# included in the documentation. +# The default value is: NO. + +EXTRACT_STATIC = NO + +# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined +# locally in source files will be included in the documentation. If set to NO +# only classes defined in header files are included. Does not have any effect +# for Java sources. +# The default value is: YES. + +EXTRACT_LOCAL_CLASSES = YES + +# This flag is only useful for Objective-C code. When set to YES local methods, +# which are defined in the implementation section but not in the interface are +# included in the documentation. If set to NO only methods in the interface are +# included. +# The default value is: NO. + +EXTRACT_LOCAL_METHODS = NO + +# If this flag is set to YES, the members of anonymous namespaces will be +# extracted and appear in the documentation as a namespace called +# 'anonymous_namespace{file}', where file will be replaced with the base name of +# the file that contains the anonymous namespace. By default anonymous namespace +# are hidden. +# The default value is: NO. + +EXTRACT_ANON_NSPACES = NO + +# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all +# undocumented members inside documented classes or files. If set to NO these +# members will be included in the various overviews, but no documentation +# section is generated. This option has no effect if EXTRACT_ALL is enabled. +# The default value is: NO. + +HIDE_UNDOC_MEMBERS = NO + +# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all +# undocumented classes that are normally visible in the class hierarchy. If set +# to NO these classes will be included in the various overviews. This option has +# no effect if EXTRACT_ALL is enabled. +# The default value is: NO. + +HIDE_UNDOC_CLASSES = NO + +# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend +# (class|struct|union) declarations. If set to NO these declarations will be +# included in the documentation. +# The default value is: NO. + +HIDE_FRIEND_COMPOUNDS = NO + +# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any +# documentation blocks found inside the body of a function. If set to NO these +# blocks will be appended to the function's detailed documentation block. +# The default value is: NO. + +HIDE_IN_BODY_DOCS = NO + +# The INTERNAL_DOCS tag determines if documentation that is typed after a +# \internal command is included. If the tag is set to NO then the documentation +# will be excluded. Set it to YES to include the internal documentation. +# The default value is: NO. + +INTERNAL_DOCS = NO + +# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file +# names in lower-case letters. If set to YES upper-case letters are also +# allowed. This is useful if you have classes or files whose names only differ +# in case and if your file system supports case sensitive file names. Windows +# and Mac users are advised to set this option to NO. +# The default value is: system dependent. + +CASE_SENSE_NAMES = YES + +# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with +# their full class and namespace scopes in the documentation. If set to YES the +# scope will be hidden. +# The default value is: NO. + +HIDE_SCOPE_NAMES = NO + +# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of +# the files that are included by a file in the documentation of that file. +# The default value is: YES. + +SHOW_INCLUDE_FILES = YES + +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + +# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include +# files with double quotes in the documentation rather than with sharp brackets. +# The default value is: NO. + +FORCE_LOCAL_INCLUDES = NO + +# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the +# documentation for inline members. +# The default value is: YES. + +INLINE_INFO = YES + +# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the +# (detailed) documentation of file and class members alphabetically by member +# name. If set to NO the members will appear in declaration order. +# The default value is: YES. + +SORT_MEMBER_DOCS = YES + +# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief +# descriptions of file, namespace and class members alphabetically by member +# name. If set to NO the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. +# The default value is: NO. + +SORT_BRIEF_DOCS = NO + +# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the +# (brief and detailed) documentation of class members so that constructors and +# destructors are listed first. If set to NO the constructors will appear in the +# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS. +# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief +# member documentation. +# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting +# detailed member documentation. +# The default value is: NO. + +SORT_MEMBERS_CTORS_1ST = NO + +# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy +# of group names into alphabetical order. If set to NO the group names will +# appear in their defined order. +# The default value is: NO. + +SORT_GROUP_NAMES = NO + +# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by +# fully-qualified names, including namespaces. If set to NO, the class list will +# be sorted only by class name, not including the namespace part. +# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. +# Note: This option applies only to the class list, not to the alphabetical +# list. +# The default value is: NO. + +SORT_BY_SCOPE_NAME = NO + +# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper +# type resolution of all parameters of a function it will reject a match between +# the prototype and the implementation of a member function even if there is +# only one candidate or it is obvious which candidate to choose by doing a +# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still +# accept a match between prototype and implementation in such cases. +# The default value is: NO. + +STRICT_PROTO_MATCHING = NO + +# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the +# todo list. This list is created by putting \todo commands in the +# documentation. +# The default value is: YES. + +GENERATE_TODOLIST = YES + +# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the +# test list. This list is created by putting \test commands in the +# documentation. +# The default value is: YES. + +GENERATE_TESTLIST = YES + +# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug +# list. This list is created by putting \bug commands in the documentation. +# The default value is: YES. + +GENERATE_BUGLIST = YES + +# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO) +# the deprecated list. This list is created by putting \deprecated commands in +# the documentation. +# The default value is: YES. + +GENERATE_DEPRECATEDLIST= YES + +# The ENABLED_SECTIONS tag can be used to enable conditional documentation +# sections, marked by \if ... \endif and \cond +# ... \endcond blocks. + +ENABLED_SECTIONS = + +# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the +# initial value of a variable or macro / define can have for it to appear in the +# documentation. If the initializer consists of more lines than specified here +# it will be hidden. Use a value of 0 to hide initializers completely. The +# appearance of the value of individual variables and macros / defines can be +# controlled using \showinitializer or \hideinitializer command in the +# documentation regardless of this setting. +# Minimum value: 0, maximum value: 10000, default value: 30. + +MAX_INITIALIZER_LINES = 30 + +# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at +# the bottom of the documentation of classes and structs. If set to YES the list +# will mention the files that were used to generate the documentation. +# The default value is: YES. + +SHOW_USED_FILES = YES + +# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This +# will remove the Files entry from the Quick Index and from the Folder Tree View +# (if specified). +# The default value is: YES. + +SHOW_FILES = YES + +# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces +# page. This will remove the Namespaces entry from the Quick Index and from the +# Folder Tree View (if specified). +# The default value is: YES. + +SHOW_NAMESPACES = YES + +# The FILE_VERSION_FILTER tag can be used to specify a program or script that +# doxygen should invoke to get the current version for each file (typically from +# the version control system). Doxygen will invoke the program by executing (via +# popen()) the command command input-file, where command is the value of the +# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided +# by doxygen. Whatever the program writes to standard output is used as the file +# version. For an example see the documentation. + +FILE_VERSION_FILTER = + +# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed +# by doxygen. The layout file controls the global structure of the generated +# output files in an output format independent way. To create the layout file +# that represents doxygen's defaults, run doxygen with the -l option. You can +# optionally specify a file name after the option, if omitted DoxygenLayout.xml +# will be used as the name of the layout file. +# +# Note that if you run doxygen from a directory containing a file called +# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE +# tag is left empty. + +LAYOUT_FILE = Documentation/styles/DoxygenLayout.xml + +# The CITE_BIB_FILES tag can be used to specify one or more bib files containing +# the reference definitions. This must be a list of .bib files. The .bib +# extension is automatically appended if omitted. This requires the bibtex tool +# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# For LaTeX the style of the bibliography can be controlled using +# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the +# search path. Do not use file names with spaces, bibtex cannot handle them. See +# also \cite for info how to create references. + +CITE_BIB_FILES = + +#--------------------------------------------------------------------------- +# Configuration options related to warning and progress messages +#--------------------------------------------------------------------------- + +# The QUIET tag can be used to turn on/off the messages that are generated to +# standard output by doxygen. If QUIET is set to YES this implies that the +# messages are off. +# The default value is: NO. + +QUIET = NO + +# The WARNINGS tag can be used to turn on/off the warning messages that are +# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES +# this implies that the warnings are on. +# +# Tip: Turn warnings on while writing the documentation. +# The default value is: YES. + +WARNINGS = YES + +# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate +# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag +# will automatically be disabled. +# The default value is: YES. + +WARN_IF_UNDOCUMENTED = YES + +# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for +# potential errors in the documentation, such as not documenting some parameters +# in a documented function, or documenting parameters that don't exist or using +# markup commands wrongly. +# The default value is: YES. + +WARN_IF_DOC_ERROR = YES + +# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that +# are documented, but have no documentation for their parameters or return +# value. If set to NO doxygen will only warn about wrong or incomplete parameter +# documentation, but not about the absence of documentation. +# The default value is: NO. + +WARN_NO_PARAMDOC = NO + +# The WARN_FORMAT tag determines the format of the warning messages that doxygen +# can produce. The string should contain the $file, $line, and $text tags, which +# will be replaced by the file and line number from which the warning originated +# and the warning text. Optionally the format may contain $version, which will +# be replaced by the version of the file (if it could be obtained via +# FILE_VERSION_FILTER) +# The default value is: $file:$line: $text. + +WARN_FORMAT = "$file:$line: $text" + +# The WARN_LOGFILE tag can be used to specify a file to which warning and error +# messages should be written. If left blank the output is written to standard +# error (stderr). + +WARN_LOGFILE = doxygen.log + +#--------------------------------------------------------------------------- +# Configuration options related to the input files +#--------------------------------------------------------------------------- + +# The INPUT tag is used to specify the files and/or directories that contain +# documented source files. You may enter file names like myfile.cpp or +# directories like /usr/src/myproject. Separate the files or directories with +# spaces. +# Note: If this tag is empty the current directory is searched. + +INPUT = . Documentation/mainpage.dox + +# This tag can be used to specify the character encoding of the source files +# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses +# libiconv (or the iconv built into libc) for the transcoding. See the libiconv +# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# possible encodings. +# The default value is: UTF-8. + +INPUT_ENCODING = UTF-8 + +# If the value of the INPUT tag contains directories, you can use the +# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and +# *.h) to filter out the source-files in the directories. If left blank the +# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, +# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, +# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, +# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, +# *.qsf, *.as and *.js. + +FILE_PATTERNS = *.h *.ino + +# The RECURSIVE tag can be used to specify whether or not subdirectories should +# be searched for input files as well. +# The default value is: NO. + +RECURSIVE = YES + +# The EXCLUDE tag can be used to specify files and/or directories that should be +# excluded from the INPUT source files. This way you can easily exclude a +# subdirectory from a directory tree whose root is specified with the INPUT tag. +# +# Note that relative paths are relative to the directory from which doxygen is +# run. + +EXCLUDE = + +# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or +# directories that are symbolic links (a Unix file system feature) are excluded +# from the input. +# The default value is: NO. + +EXCLUDE_SYMLINKS = NO + +# If the value of the INPUT tag contains directories, you can use the +# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude +# certain files from those directories. +# +# Note that the wildcards are matched against the file with absolute path, so to +# exclude all test directories for example use the pattern */test/* + +EXCLUDE_PATTERNS = + +# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names +# (namespaces, classes, functions, etc.) that should be excluded from the +# output. The symbol name can be a fully qualified name, a word, or if the +# wildcard * is used, a substring. Examples: ANamespace, AClass, +# AClass::ANamespace, ANamespace::*Test +# +# Note that the wildcards are matched against the file with absolute path, so to +# exclude all test directories use the pattern */test/* + +EXCLUDE_SYMBOLS = + +# The EXAMPLE_PATH tag can be used to specify one or more files or directories +# that contain example code fragments that are included (see the \include +# command). + +EXAMPLE_PATH = examples drivers/AES + +# If the value of the EXAMPLE_PATH tag contains directories, you can use the +# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and +# *.h) to filter out the source-files in the directories. If left blank all +# files are included. + +EXAMPLE_PATTERNS = + +# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be +# searched for input files to be used with the \include or \dontinclude commands +# irrespective of the value of the RECURSIVE tag. +# The default value is: NO. + +EXAMPLE_RECURSIVE = NO + +# The IMAGE_PATH tag can be used to specify one or more files or directories +# that contain images that are to be included in the documentation (see the +# \image command). + +IMAGE_PATH = Documentation/img + +# The INPUT_FILTER tag can be used to specify a program that doxygen should +# invoke to filter for each input file. Doxygen will invoke the filter program +# by executing (via popen()) the command: +# +# +# +# where is the value of the INPUT_FILTER tag, and is the +# name of an input file. Doxygen will then use the output that the filter +# program writes to standard output. If FILTER_PATTERNS is specified, this tag +# will be ignored. +# +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. + +INPUT_FILTER = + +# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern +# basis. Doxygen will compare the file name with each pattern and apply the +# filter if there is a match. The filters are a list of the form: pattern=filter +# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how +# filters are used. If the FILTER_PATTERNS tag is empty or if none of the +# patterns match the file name, INPUT_FILTER is applied. + +FILTER_PATTERNS = + +# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using +# INPUT_FILTER ) will also be used to filter the input files that are used for +# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES). +# The default value is: NO. + +FILTER_SOURCE_FILES = NO + +# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file +# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and +# it is also possible to disable source filtering for a specific pattern using +# *.ext= (so without naming a filter). +# This tag requires that the tag FILTER_SOURCE_FILES is set to YES. + +FILTER_SOURCE_PATTERNS = + +# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want to reuse the introduction page also for the doxygen output. + +USE_MDFILE_AS_MAINPAGE = + +#--------------------------------------------------------------------------- +# Configuration options related to source browsing +#--------------------------------------------------------------------------- + +# If the SOURCE_BROWSER tag is set to YES then a list of source files will be +# generated. Documented entities will be cross-referenced with these sources. +# +# Note: To get rid of all source code in the generated output, make sure that +# also VERBATIM_HEADERS is set to NO. +# The default value is: NO. + +SOURCE_BROWSER = NO + +# Setting the INLINE_SOURCES tag to YES will include the body of functions, +# classes and enums directly into the documentation. +# The default value is: NO. + +INLINE_SOURCES = NO + +# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any +# special comment blocks from generated source code fragments. Normal C, C++ and +# Fortran comments will always remain visible. +# The default value is: YES. + +STRIP_CODE_COMMENTS = YES + +# If the REFERENCED_BY_RELATION tag is set to YES then for each documented +# function all documented functions referencing it will be listed. +# The default value is: NO. + +REFERENCED_BY_RELATION = NO + +# If the REFERENCES_RELATION tag is set to YES then for each documented function +# all documented entities called/used by that function will be listed. +# The default value is: NO. + +REFERENCES_RELATION = NO + +# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set +# to YES, then the hyperlinks from functions in REFERENCES_RELATION and +# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will +# link to the documentation. +# The default value is: YES. + +REFERENCES_LINK_SOURCE = YES + +# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the +# source code will show a tooltip with additional information such as prototype, +# brief description and links to the definition and documentation. Since this +# will make the HTML file larger and loading of large files a bit slower, you +# can opt to disable this feature. +# The default value is: YES. +# This tag requires that the tag SOURCE_BROWSER is set to YES. + +SOURCE_TOOLTIPS = YES + +# If the USE_HTAGS tag is set to YES then the references to source code will +# point to the HTML generated by the htags(1) tool instead of doxygen built-in +# source browser. The htags tool is part of GNU's global source tagging system +# (see http://www.gnu.org/software/global/global.html). You will need version +# 4.8.6 or higher. +# +# To use it do the following: +# - Install the latest version of global +# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Make sure the INPUT points to the root of the source tree +# - Run doxygen as normal +# +# Doxygen will invoke htags (and that will in turn invoke gtags), so these +# tools must be available from the command line (i.e. in the search path). +# +# The result: instead of the source browser generated by doxygen, the links to +# source code will now point to the output of htags. +# The default value is: NO. +# This tag requires that the tag SOURCE_BROWSER is set to YES. + +USE_HTAGS = NO + +# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a +# verbatim copy of the header file for each class for which an include is +# specified. Set to NO to disable this. +# See also: Section \class. +# The default value is: YES. + +VERBATIM_HEADERS = YES + +#--------------------------------------------------------------------------- +# Configuration options related to the alphabetical class index +#--------------------------------------------------------------------------- + +# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all +# compounds will be generated. Enable this if the project contains a lot of +# classes, structs, unions or interfaces. +# The default value is: YES. + +ALPHABETICAL_INDEX = YES + +# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in +# which the alphabetical index list will be split. +# Minimum value: 1, maximum value: 20, default value: 5. +# This tag requires that the tag ALPHABETICAL_INDEX is set to YES. + +COLS_IN_ALPHA_INDEX = 5 + +# In case all classes in a project start with a common prefix, all classes will +# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag +# can be used to specify a prefix (or a list of prefixes) that should be ignored +# while generating the index headers. +# This tag requires that the tag ALPHABETICAL_INDEX is set to YES. + +IGNORE_PREFIX = + +#--------------------------------------------------------------------------- +# Configuration options related to the HTML output +#--------------------------------------------------------------------------- + +# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output +# The default value is: YES. + +GENERATE_HTML = YES + +# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of +# it. +# The default directory is: html. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_OUTPUT = html + +# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each +# generated HTML page (for example: .htm, .php, .asp). +# The default value is: .html. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_FILE_EXTENSION = .html + +# The HTML_HEADER tag can be used to specify a user-defined HTML header file for +# each generated HTML page. If the tag is left blank doxygen will generate a +# standard header. +# +# To get valid HTML the header file that includes any scripts and style sheets +# that doxygen needs, which is dependent on the configuration options used (e.g. +# the setting GENERATE_TREEVIEW). It is highly recommended to start with a +# default header using +# doxygen -w html new_header.html new_footer.html new_stylesheet.css +# YourConfigFile +# and then modify the file new_header.html. See also section "Doxygen usage" +# for information on how to generate the default header that doxygen normally +# uses. +# Note: The header is subject to change so you typically have to regenerate the +# default header when upgrading to a newer version of doxygen. For a description +# of the possible markers and block names see the documentation. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_HEADER = Documentation/styles/html/headerFile.html + +# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each +# generated HTML page. If the tag is left blank doxygen will generate a standard +# footer. See HTML_HEADER for more information on how to generate a default +# footer and what special commands can be used inside the footer. See also +# section "Doxygen usage" for information on how to generate the default footer +# that doxygen normally uses. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_FOOTER = Documentation/styles/html/footerFile.html + +# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style +# sheet that is used by each HTML page. It can be used to fine-tune the look of +# the HTML output. If left blank doxygen will generate a default style sheet. +# See also section "Doxygen usage" for information on how to generate the style +# sheet that doxygen normally uses. +# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as +# it is more robust and this tag (HTML_STYLESHEET) will in the future become +# obsolete. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_STYLESHEET = + +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional user- +# defined cascading style sheet that is included after the standard style sheets +# created by doxygen. Using this option one can overrule certain style aspects. +# This is preferred over using HTML_STYLESHEET since it does not replace the +# standard style sheet and is therefor more robust against future updates. +# Doxygen will copy the style sheet file to the output directory. For an example +# see the documentation. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_EXTRA_STYLESHEET = Documentation/styles/html/styleSheetFile.css + +# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or +# other source files which should be copied to the HTML output directory. Note +# that these files will be copied to the base HTML output directory. Use the +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# files. In the HTML_STYLESHEET file, use the file name only. Also note that the +# files will be copied as-is; there are no commands or markers available. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_EXTRA_FILES = + +# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen +# will adjust the colors in the stylesheet and background images according to +# this color. Hue is specified as an angle on a colorwheel, see +# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 +# purple, and 360 is red again. +# Minimum value: 0, maximum value: 359, default value: 220. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_COLORSTYLE_HUE = 220 + +# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors +# in the HTML output. For a value of 0 the output will use grayscales only. A +# value of 255 will produce the most vivid colors. +# Minimum value: 0, maximum value: 255, default value: 100. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_COLORSTYLE_SAT = 50 + +# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the +# luminance component of the colors in the HTML output. Values below 100 +# gradually make the output lighter, whereas values above 100 make the output +# darker. The value divided by 100 is the actual gamma applied, so 80 represents +# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not +# change the gamma. +# Minimum value: 40, maximum value: 240, default value: 80. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_COLORSTYLE_GAMMA = 80 + +# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_TIMESTAMP = NO + +# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML +# documentation will contain sections that can be hidden and shown after the +# page has loaded. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_SECTIONS = YES + +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries +# shown in the various tree structured indices initially; the user can expand +# and collapse entries dynamically later on. Doxygen will expand the tree to +# such a level that at most the specified number of entries are visible (unless +# a fully collapsed tree already exceeds this amount). So setting the number of +# entries 1 will produce a full collapsed tree by default. 0 is a special value +# representing an infinite number of entries and will result in a full expanded +# tree by default. +# Minimum value: 0, maximum value: 9999, default value: 100. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_INDEX_NUM_ENTRIES = 100 + +# If the GENERATE_DOCSET tag is set to YES, additional index files will be +# generated that can be used as input for Apple's Xcode 3 integrated development +# environment (see: http://developer.apple.com/tools/xcode/), introduced with +# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# Makefile in the HTML output directory. Running make will produce the docset in +# that directory and running make install will install the docset in +# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at +# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html +# for more information. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_DOCSET = NO + +# This tag determines the name of the docset feed. A documentation feed provides +# an umbrella under which multiple documentation sets from a single provider +# (such as a company or product suite) can be grouped. +# The default value is: Doxygen generated docs. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_FEEDNAME = "Doxygen generated docs" + +# This tag specifies a string that should uniquely identify the documentation +# set bundle. This should be a reverse domain-name style string, e.g. +# com.mycompany.MyDocSet. Doxygen will append .docset to the name. +# The default value is: org.doxygen.Project. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_BUNDLE_ID = org.doxygen.Project + +# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify +# the documentation publisher. This should be a reverse domain-name style +# string, e.g. com.mycompany.MyDocSet.documentation. +# The default value is: org.doxygen.Publisher. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_PUBLISHER_ID = org.doxygen.Publisher + +# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher. +# The default value is: Publisher. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_PUBLISHER_NAME = Publisher + +# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three +# additional HTML index files: index.hhp, index.hhc, and index.hhk. The +# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop +# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# Windows. +# +# The HTML Help Workshop contains a compiler that can convert all HTML output +# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML +# files are now used as the Windows 98 help format, and will replace the old +# Windows help format (.hlp) on all Windows platforms in the future. Compressed +# HTML files also contain an index, a table of contents, and you can search for +# words in the documentation. The HTML workshop also contains a viewer for +# compressed HTML files. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_HTMLHELP = NO + +# The CHM_FILE tag can be used to specify the file name of the resulting .chm +# file. You can add a path in front of the file if the result should not be +# written to the html output directory. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +CHM_FILE = + +# The HHC_LOCATION tag can be used to specify the location (absolute path +# including file name) of the HTML help compiler ( hhc.exe). If non-empty +# doxygen will try to run the HTML help compiler on the generated index.hhp. +# The file has to be specified with full path. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +HHC_LOCATION = + +# The GENERATE_CHI flag controls if a separate .chi index file is generated ( +# YES) or that it should be included in the master .chm file ( NO). +# The default value is: NO. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +GENERATE_CHI = NO + +# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc) +# and project file content. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +CHM_INDEX_ENCODING = + +# The BINARY_TOC flag controls whether a binary table of contents is generated ( +# YES) or a normal table of contents ( NO) in the .chm file. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +BINARY_TOC = NO + +# The TOC_EXPAND flag can be set to YES to add extra items for group members to +# the table of contents of the HTML help documentation and to the tree view. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +TOC_EXPAND = NO + +# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and +# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that +# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help +# (.qch) of the generated HTML documentation. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_QHP = NO + +# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify +# the file name of the resulting .qch file. The path specified is relative to +# the HTML output folder. +# This tag requires that the tag GENERATE_QHP is set to YES. + +QCH_FILE = + +# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help +# Project output. For more information please see Qt Help Project / Namespace +# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# The default value is: org.doxygen.Project. +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_NAMESPACE = org.doxygen.Project + +# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt +# Help Project output. For more information please see Qt Help Project / Virtual +# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# folders). +# The default value is: doc. +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_VIRTUAL_FOLDER = doc + +# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom +# filter to add. For more information please see Qt Help Project / Custom +# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# filters). +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_CUST_FILTER_NAME = + +# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the +# custom filter to add. For more information please see Qt Help Project / Custom +# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# filters). +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_CUST_FILTER_ATTRS = + +# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this +# project's filter section matches. Qt Help Project / Filter Attributes (see: +# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_SECT_FILTER_ATTRS = + +# The QHG_LOCATION tag can be used to specify the location of Qt's +# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the +# generated .qhp file. +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHG_LOCATION = + +# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be +# generated, together with the HTML files, they form an Eclipse help plugin. To +# install this plugin and make it available under the help contents menu in +# Eclipse, the contents of the directory containing the HTML and XML files needs +# to be copied into the plugins directory of eclipse. The name of the directory +# within the plugins directory should be the same as the ECLIPSE_DOC_ID value. +# After copying Eclipse needs to be restarted before the help appears. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_ECLIPSEHELP = NO + +# A unique identifier for the Eclipse help plugin. When installing the plugin +# the directory name containing the HTML and XML files should also have this +# name. Each documentation set should have its own identifier. +# The default value is: org.doxygen.Project. +# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES. + +ECLIPSE_DOC_ID = org.doxygen.Project + +# If you want full control over the layout of the generated HTML pages it might +# be necessary to disable the index and replace it with your own. The +# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top +# of each HTML page. A value of NO enables the index and the value YES disables +# it. Since the tabs in the index contain the same information as the navigation +# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +DISABLE_INDEX = NO + +# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index +# structure should be generated to display hierarchical information. If the tag +# value is set to YES, a side panel will be generated containing a tree-like +# index structure (just like the one that is generated for HTML Help). For this +# to work a browser that supports JavaScript, DHTML, CSS and frames is required +# (i.e. any modern browser). Windows users are probably better off using the +# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can +# further fine-tune the look of the index. As an example, the default style +# sheet generated by doxygen has an example that shows how to put an image at +# the root of the tree instead of the PROJECT_NAME. Since the tree basically has +# the same information as the tab index, you could consider setting +# DISABLE_INDEX to YES when enabling this option. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_TREEVIEW = NO + +# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that +# doxygen will group on one line in the generated HTML documentation. +# +# Note that a value of 0 will completely suppress the enum values from appearing +# in the overview section. +# Minimum value: 0, maximum value: 20, default value: 4. +# This tag requires that the tag GENERATE_HTML is set to YES. + +ENUM_VALUES_PER_LINE = 4 + +# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used +# to set the initial width (in pixels) of the frame in which the tree is shown. +# Minimum value: 0, maximum value: 1500, default value: 250. +# This tag requires that the tag GENERATE_HTML is set to YES. + +TREEVIEW_WIDTH = 250 + +# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to +# external symbols imported via tag files in a separate window. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +EXT_LINKS_IN_WINDOW = NO + +# Use this tag to change the font size of LaTeX formulas included as images in +# the HTML documentation. When you change the font size after a successful +# doxygen run you need to manually remove any form_*.png images from the HTML +# output directory to force them to be regenerated. +# Minimum value: 8, maximum value: 50, default value: 10. +# This tag requires that the tag GENERATE_HTML is set to YES. + +FORMULA_FONTSIZE = 10 + +# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# generated for formulas are transparent PNGs. Transparent PNGs are not +# supported properly for IE 6.0, but are supported on all modern browsers. +# +# Note that when changing this option you need to delete any form_*.png files in +# the HTML output directory before the changes have effect. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +FORMULA_TRANSPARENT = YES + +# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see +# http://www.mathjax.org) which uses client side Javascript for the rendering +# instead of using prerendered bitmaps. Use this if you do not have LaTeX +# installed or if you want to formulas look prettier in the HTML output. When +# enabled you may also need to install MathJax separately and configure the path +# to it using the MATHJAX_RELPATH option. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +USE_MATHJAX = NO + +# When MathJax is enabled you can set the default output format to be used for +# the MathJax output. See the MathJax site (see: +# http://docs.mathjax.org/en/latest/output.html) for more details. +# Possible values are: HTML-CSS (which is slower, but has the best +# compatibility), NativeMML (i.e. MathML) and SVG. +# The default value is: HTML-CSS. +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_FORMAT = HTML-CSS + +# When MathJax is enabled you need to specify the location relative to the HTML +# output directory using the MATHJAX_RELPATH option. The destination directory +# should contain the MathJax.js script. For instance, if the mathjax directory +# is located at the same level as the HTML output directory, then +# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax +# Content Delivery Network so you can quickly see the result without installing +# MathJax. However, it is strongly recommended to install a local copy of +# MathJax from http://www.mathjax.org before deployment. +# The default value is: http://cdn.mathjax.org/mathjax/latest. +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest + +# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax +# extension names that should be enabled during MathJax rendering. For example +# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_EXTENSIONS = + +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces +# of code that will be used on startup of the MathJax code. See the MathJax site +# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an +# example see the documentation. +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_CODEFILE = + +# When the SEARCHENGINE tag is enabled doxygen will generate a search box for +# the HTML output. The underlying search engine uses javascript and DHTML and +# should work on any modern browser. Note that when using HTML help +# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET) +# there is already a search function so this one should typically be disabled. +# For large projects the javascript based search engine can be slow, then +# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to +# search using the keyboard; to jump to the search box use + S +# (what the is depends on the OS and browser, but it is typically +# , /