123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157 |
- \section {Effektivwert und Klirrfaktor}
- \begin{minipage}[c]{.7\textwidth}
- Bild 1 zeigt einen Teil aus dem Ersatzschaltbild eines Transformators, aus dem hervorgeht,
- dass sich der Leerlaufstrom $i_0(t)$ zusammensetzt aus dem (verzerrten) Magnetisierungsstrom
- $i_\mu(t)$ und dem Strom $i_{Fe}(t)$, der die Eisenverluste repräsentiert.
- \end{minipage}
- \begin{minipage}[c]{.3\textwidth}
- \begin{align*}
- \begin{tikzpicture}[scale=1.5]
- \begin{scope}[>=latex,very thick,xshift=0cm,yshift=0cm,rotate=90]%Spule |
- \draw (0,0)--(.3,0) (.7,0)--(1,0)node at(.5,-.0667) [right] {$L_{1h}$};
- \fill (.3,-0.0667)rectangle(.7,0.0667);
- \draw [<-,red] (.75,.1)--(.95,.1)node at(.85,.1)[left]{\footnotesize$i_{\mu}(t)$};
- \end{scope}
- \begin{scope}[>=latex,very thick,xshift=1cm,yshift=0cm,rotate=90]
- \draw (0,0)--(.3,0) (.3,-0.0667)rectangle(.7,0.0667) (.7,0)--(1,0)node at (.5,-.0667) [right] {$R_{Fe}$};
- \draw [<-,red] (.75,-.1)--(.95,-.1)node at(.85,-.1)[right]{\footnotesize$i_{Fe}(t)$};
- \end{scope}
- \begin{scope}[>=latex,very thick,xshift=0cm,yshift=0cm]%Fehlstellen Eckverbindungen.
- \draw(0,.1)--(0,0)--(1,0)--(1,.1)(0,.9)--(0,1)--(1,1)--(.9,1)(.5,1)--(.5,1.5)(.5,0)--(.5,-.5);
- \fill (0.5,0)circle(0.025cm)(.5,1)circle(0.025cm);
- \draw [<-,red] (.6,-.35)--(.6,-.15)node at(.6,-.25)[right]{\footnotesize$i_{0}(t)$};
- \end{scope}
- \draw node at (.5,-1){Bild 1};
- \end{tikzpicture}
- \end{align*}
- \end{minipage}
- Bild 2 zeigt die zeitlichen Verläufe von $i_\mu(t)$ und $i_{Fe}(t)$, welche durch folgende Fourier-Reihen approximiert werden können:\\
- $i_\mu(t)=10\,\milli\ampere\cdot \cos(\omega t) + 2,88\,\milli\ampere\cdot \cos(3\omega t)$;\\ $i_{Fe}(t)=-4\,\milli\ampere\cdot \sin(\omega t)$\\[\baselineskip]
- Der resultierende, in Bild 3 dargestellte Leerlaufstrom ist die Summe:\\
- $i_0(t)= i_\mu(t)+i_{Fe}(t)$
- \begin{align*}
- % \begin{tikzpicture}[scale=1.5]
- % \begin{scope}[>=latex,very thick,xshift=0cm,yshift=0cm,rotate=90]%Spule |
- % \draw (0,0)--(.3,0) (.7,0)--(1,0)node at(.5,-.0667) [right] {$L_{1h}$};
- % \fill (.3,-0.0667)rectangle(.7,0.0667);
- % \draw [<-,red] (.75,.1)--(.95,.1)node at(.85,.1)[left]{\footnotesize$i_{\mu}(t)$};
- % \end{scope}
- % \begin{scope}[>=latex,very thick,xshift=1cm,yshift=0cm,rotate=90]
- % \draw (0,0)--(.3,0) (.3,-0.0667)rectangle(.7,0.0667) (.7,0)--(1,0)node at (.5,-.0667) [right] {$R_{Fe}$};
- % \draw [<-,red] (.75,-.1)--(.95,-.1)node at(.85,-.1)[right]{\footnotesize$i_{Fe}(t)$};
- % \end{scope}
- % \begin{scope}[>=latex,very thick,xshift=0cm,yshift=0cm]%Fehlstellen Eckverbindungen.
- % \draw(0,.1)--(0,0)--(1,0)--(1,.1)(0,.9)--(0,1)--(1,1)--(.9,1)(.5,1)--(.5,1.5)(.5,0)--(.5,-.5);
- % \fill (0.5,0)circle(0.025cm)(.5,1)circle(0.025cm);
- % \draw [<-,red] (.6,-.35)--(.6,-.15)node at(.6,-.25)[right]{\footnotesize$i_{0}(t)$};
- % \end{scope}
- %\draw node at (.5,-1){Bild 1};
- % \end{tikzpicture}
- \begin{tikzpicture}[scale=1.25]
- \begin{scope}[>=latex, xshift=0cm, yshift=0]
- \foreach \ii in {5} { % Enter Number of Decades in x
- \foreach \jj in {2.5} { % Enter Number of Decades in y
- \foreach \i in {1,2,...,\ii} {
- \foreach \j in {0,1,2,...,\jj} {
- \draw[black!50!, step=0.5] (0,-.5) grid (\ii,\jj); % Draw Sub Linear grid
- }}% End Log Grid
- \draw[black!80!] (0,-.5) grid (\ii,\jj); % Draw Linear grid
- \draw [->,thick] (0,-.5)--(0,\jj+.25) node (yaxis) [above] {$i\,[\milli\ampere]$};
- \draw [->,thick] (0,1)--(\ii+.25,1) node (xaxis) [right] {$\omega t$}; % Draw axes
- \draw node at (0,-.5)[below]{$0$};
- \draw node at (2,-.5)[below]{$\pi$};
- \draw node at (4,-.5)[below]{$2\pi$};
- \foreach \y in {-10,0,10}% y Axis Label:
- \node [anchor=east] at(0,\y/10+1){$\y$};
- }}
- \end{scope}
- \begin{scope}[>=latex, xshift=0cm, yshift=1cm]
- \draw[color=red,thick,domain=0:5,smooth,samples=100] plot[id=iomega] function{1*cos(.5*3.14*x)+.288*cos(1.5*3.14*x)};
- \draw[color=blue,thick,domain=0:5,smooth,samples=100] plot[id=iFe] function{-.4*sin(.5*3.14*x)};
- \draw[red] node at (.825,1.25) {{\footnotesize $i_{\mu}(t)$}};
- \draw[blue] node at (2.5,.75) {{\footnotesize $i_{Fe}(t)$}};
- \end{scope}
- \draw node at (2.25,-1)[below]{Bild 2};
- \end{tikzpicture}
- \begin{tikzpicture}[scale=1.25]
- \begin{scope}[>=latex, xshift=0cm, yshift=0]
- \foreach \ii in {5} { % Enter Number of Decades in x
- \foreach \jj in {2.5} { % Enter Number of Decades in y
- \foreach \i in {1,2,...,\ii} {
- \foreach \j in {0,1,2,...,\jj} {
- \draw[black!50!, step=0.5] (0,-.5) grid (\ii,\jj); % Draw Sub Linear grid
- }}% End Log Grid
- \draw[black!80!] (0,-.5) grid (\ii,\jj); % Draw Linear grid
- \draw [->,thick] (0,-.5)--(0,\jj+.25) node (yaxis) [above] {$i\,[\milli\ampere]$};
- \draw [->,thick] (0,1)--(\ii+.25,1) node (xaxis) [right] {$\omega t$}; % Draw axes
- \draw node at (0,-.5)[below]{$0$};
- \draw node at (2,-.5)[below]{$\pi$};
- \draw node at (4,-.5)[below]{$2\pi$};
- \foreach \y in {-10,0,10}% y Axis Label:
- \node [anchor=east] at(0,\y/10+1){$\y$};
- }}
- \end{scope}
- \begin{scope}[>=latex, xshift=0cm, yshift=1cm]
- \draw[color=red!50!blue,thick,domain=0:5,smooth,samples=100] plot[id=iomega] function{1*cos(.5*3.14*x)+.288*cos(1.5*3.14*x)-.4*sin(.5*3.14*x)};
- \draw[red!50!blue] node at (.825,1.25) {{\footnotesize $i_0(t)$}};
- \end{scope}
- \draw node at (2.25,-1)[below]{Bild 3};
- \end{tikzpicture}
- \end{align*}
- \renewcommand{\labelenumi}{\alph{enumi})}
- \begin{enumerate}
- \item Berechnen Sie Effektivwert und Klirrfaktor von $i_\mu(t)$
- \item Berechnen Sie Effektivwert und Klirrfaktor von $i_0(t)$
- \end{enumerate}
- \ifthenelse{\equal{\toPrint}{Lösung}}{%
- \begin{align}
- \intertext{Formeln:}
- k&=\frac{\sqrt{\sum \limits_{n=2}^{\infty}A^2_n}}{\sqrt{\sum \limits_{n=1}^{\infty}A^2_n}}=\frac{\text{Effektivwert der Oberschwingungen}}{\text{Effektivwert des Gesamtsignals}}
- \end{align}
- \clearpage
- Berechnung:
- \begin{align*}
- \intertext{a) Effektivwert $I_{\mu}$ und Klirrfaktor $k_{\mu}$}
- I_{\mu}&=\sqrt{I_{\mu,\omega}^{\phantom{\mu}2}+I_{\mu,3\omega}^{\phantom{\mu}2}}
- =\sqrt{\left(\frac{\widehat{i}_{\mu,\omega}}{\sqrt{2}}\right)^2
- +\left(\frac{\widehat{i}_{\mu,3\omega}}{\sqrt{2}}\right)^2}
- =\frac{1}{\sqrt{2}}\cdot \sqrt{(10\,\milli\ampere)^2+(2{,}88\,\milli\ampere)^2}=\uuline{7{,}36\,\milli\ampere}\\
- %I_{\mu}&=\sqrt{I_{\mu,\omega}^{\phantom{\mu}2}+I_{\mu,3\omega}^{\phantom{\mu}2}}=\frac{1}{\sqrt{2}}\cdot \sqrt{\widehat{i}_{\mu,\omega}^{\phantom{\mu}2}+\widehat{i}_{\mu,3\omega}^{\phantom{\mu}2}}=\frac{1}{\sqrt{2}}\cdot \sqrt{(10\,\milli\ampere)^2+(2{,}88\,\milli\ampere)^2}=\uuline{7{,}36\,\milli\ampere}\\
- k_{\mu}&=\frac{I_{\mu,3\omega}}{I_{\mu}}
- =\frac{\widehat{i}_{\mu,3\omega}\cancel{/\sqrt{2}}}{\sqrt{\widehat{i}_{\mu,\omega}^{\phantom{\mu}2}
- +\widehat{i}_{\mu,3\omega}^{\phantom{\mu}2}}\cancel{/\sqrt{2}}}
- =\frac{2{,}88\,\milli\ampere}{\sqrt{(10\,\milli\ampere)^2+(2{,}88\,\milli\ampere)^2}}=\uuline{0{,}277}=\uuline{27{,}7\%}\\
- \end{align*}
- \begin{minipage}[c]{.8\textwidth}
- \begin{align*}
- \intertext{b) Effektivwert $I_0$ und Klirrfaktor $k_0$}
- \widehat{i}_{0,3\omega}&=\widehat{i}_{\mu,3\omega}=2{,}88\,\milli\ampere\\
- \intertext{Nulldurchgang von $\widehat{i}_{Fe}$ bei den Spitzenwerten}\\
- \widehat{i}_{0,\omega}&=\sqrt{\widehat{i}_{\mu,\omega}^{\phantom{\mu}2}+\widehat{i}_{Fe,\omega}^{\phantom{Fe}2}}\\
- &=\sqrt{(10\,\milli\ampere)^2+(4\,\milli\ampere)^2}=10{,}77\,\milli\ampere\\[\baselineskip]
- I_0&=\frac{1}{\sqrt{2}}\cdot \sqrt{\widehat{i}_{0,\omega}^{\phantom{\mu}2}+\widehat{i}_{0,3\omega}^{\phantom{\mu}2}}=\frac{1}{\sqrt{2}}\cdot \sqrt{(10{,}77\,\milli\ampere)^2+(2{,}88\,\milli\ampere)^2}=\uuline{7{,}88\,\milli\ampere}\\
- k_0&=\frac{\widehat{i}_{0,3\omega}\cancel{/\sqrt{2}}}{\sqrt{\widehat{i}_{0,\omega}^{\phantom{\mu}2}+\widehat{i}_{0,3\omega}^{\phantom{\mu}2}}\cancel{/\sqrt{2}}}
- =\frac{2{,}88\,\milli\ampere}{\sqrt{(10{,}77\,\milli\ampere)^2+(2{,}88\,\milli\ampere)^2}}=\uuline{0{,}258}=\uuline{25{,}8\%}
- \end{align*}
- \end{minipage}
- \begin{minipage}[c]{.2\textwidth}
- \begin{tikzpicture}[scale=1.2]
- \begin{scope}[>=latex, xshift=2cm, yshift=5]
- \draw[dashed](0,-2)rectangle(1,0);
- \draw[->,blue](0,0)--(1,0)node[right]{$\widehat{i}_{Fe,\omega}$};
- \draw[->,red](0,0)--(0,-2)node[below]{$\widehat{i}_{\mu,\omega}$};
- \draw[->,red!50!blue](0,0)--(1,-2)node[below right]{$\widehat{i}_{0,\omega}$};
- \end{scope}
- \end{tikzpicture}
- \end{minipage}\\[\baselineskip]
-
- \uline{Nicht gefragt}\\[\baselineskip]
- Typische Klirrfaktoren:\\
- Rechteckschwingung $33\%$\\
- Sprache noch verständlich $10\%$\\
- Max. HiFi Verstärker $1\%$\\
- Guter HiFi Verstärker $0{,}1\%$\\
-
- Weiteres unter \url{http://de.wikipedia.org/wiki/Klirrfaktor}
- \clearpage
- }{}%
|