ESP8266_Treppenlicht/lib/treppe/treppe.h

#ifndef __TREPPE_H
#define __TREPPE_H

#include "FSMTreppe4/FSMTreppe4.h"
#include "PCA9685.h"
#include <EEPROM.h>

// #define LDR_REGELUNG // comment in to activate LDR control
// #define LDRDEBUG  // comment in to show LDR measurement
#define LDR_HYS 100 // Hysteresis for switching off FSM [lux]
#define LDR_AVERAGE_SAMPLES 50

#define SENSOR_OBEN 16
#define SENSOR_UNTEN 12
#define OE 14

#define INT_TIME 20       // interrupt intervall [ms]
#define TIME_MS_MAX 5000  // maximum time for animation [ms]

enum vorgabe_typ_t { VORGABE_PROZENT = 0, VORGABE_12BIT = 1 };

#define EEP_START_ADDR 100      // define Start Address for "EEPROM" storage -> depends on size of "wifi_data"!

class Treppe {
private:
  const uint8_t stufen;

  struct stairway_param_t {
    uint16_t time_ldr = 500;
    uint16_t time_per_stair = 300; // dimmtime per stair [ms]
    uint16_t idle_pwm_max = 100;
    uint16_t active_pwm = 2000;
    uint16_t ldr_schwelle = 30; // activation value for FSM [lx]
  };
  stairway_param_t param;
  stairway_param_t param_pend; // zwischenspeicher änderungen
  bool param_changed = false;

  float ldr_average = 0.0;
  uint16_t ldr_average_cnt = 0;
  uint16_t idle_pwm_ist = 0;
  uint16_t idle_pwm_soll = 0;

  struct fsm_pending_inputs_t {
    bool anim_beendet = true;
    bool sensor_unten = false;
    bool last_s_unten = false;
    bool web_ctrl_s_unten = false;
    bool sensor_oben = false;
    bool last_s_oben = false;
    bool web_ctrl_s_oben = false;
    bool ldr_changed = false;
  };
  fsm_pending_inputs_t fsm_pend;

  struct dimmer_t {
    uint8_t stufe = 0;
    uint16_t ticks = 0;
    uint16_t tick = 0;

    float delta_pwm = 0.0;
    float pwm = 0.0;
    uint16_t start_pwm = 0;
    uint16_t ziel_pwm = 0;
  };
  enum dimmer_type_t { DIM_STUFEN = 0, DIM_LDR = 1 };
  dimmer_t dimmer_stufen;
  dimmer_t dimmer_ldr;

  // initialize with i2c-Address 0, use Wire Library
  PCA9685 pwmController;
  FSMTreppeModelClass FSMTreppe_Obj;
  FSMTreppeModelClass::ExtU_FSMTreppe_T fsm_inputs;
  FSMTreppeModelClass::ExtY_FSMTreppe_T fsm_outputs;
  enum fsm_status_t {
    ST_INAKTIV_LDR = 0,
    ST_AUFDIMMEN_LDR = 1,
    ST_ABDIMMEN_LDR = 2,
    ST_RUHEZUSTAND = 3,
    ST_AUFDIMMEN_HOCH = 4,
    ST_WARTEN_HOCH = 5,
    ST_ABDIMMEN_HOCH = 6,
    ST_AUFDIMMEN_RUNTER = 7,
    ST_WARTEN_RUNTER = 8,
    ST_ABDIMMEN_RUNTER = 9,
    ST_LDR_CHANGED = 10
  };
  enum fsm_laufrichtung_t { LR_RUNTER = 0, LR_HOCH = 1 };
  enum fsm_dimmrichtung_t { DR_ABDIMMEN = 0, DR_AUFDIMMEN = 1 };

  void read_sensors();
  void print_state_on_change();

  /* DIMM */
  bool dimmer_tick(dimmer_t *dimmer, bool dim_type);
  void start_animation(dimmer_t *dimmer, bool dim_type, uint16_t on_pwm,
                       uint16_t off_pwm);

  /* LDR */
  bool read_sensor(int sensor);
  float read_ldr();
  void sample_ldr();

  bool check_ldr(float ldr_avg);
  void update_soll_pwm_with_ldr(float ldr_avg);

public:
  Treppe(uint8_t _stufen) : stufen(_stufen) { FSMTreppe_Obj.initialize(); }
  ~Treppe() { FSMTreppe_Obj.terminate(); }

  void setup();
  void task(); // call periodically

  // Parameter section
  void save_param_to_eeprom();
  void param_to_json(char* json_str, size_t sz);

  void set_idle_pwm_max(const uint16_t value, const vorgabe_typ_t vorgabe_typ);
  void set_active_pwm(const uint16_t value, const vorgabe_typ_t vorgabe_typ);
  
  void set_time_ldr(const uint16_t value);
  void set_time_per_stair(const uint16_t value);
  void set_ldr_schwelle(const uint16_t value, const vorgabe_typ_t vorgabe_typ);

  void overwrite_sensors(bool s_oben, bool s_unten);
};

#endif // __TREPPE_H