added test

.vscode/extensions.json

@@ -1,7 +1,7 @@
-{
+{
-    // See http://go.microsoft.com/fwlink/?LinkId=827846
+    // See http://go.microsoft.com/fwlink/?LinkId=827846
-    // for the documentation about the extensions.json format
+    // for the documentation about the extensions.json format
-    "recommendations": [
+    "recommendations": [
-        "platformio.platformio-ide"
+        "platformio.platformio-ide"
-    ]
+    ]
-}
+}

doku.txt

@@ -0,0 +1,3 @@
+Hardware Timer didnt work https://github.com/khoih-prog/ESP8266TimerInterrupt#why-using-isr-based-hardware-timer-interrupt-is-better
+=> Software Timer https://ullisroboterseite.de/esp8266-timing.html#timer
+

include/http/index.html

@@ -23,9 +23,13 @@
         </label>
       </div>
       <div class="pwm">
-        <label id="l_pwm"></label>
+        <label id="label_pwm"></label>
         <input type="range" min="1" max="100" value="50" class="rangeslider" id="range1">
       </div>
+      <div class="timer">
+        <label id="label_timer"></label>
+        <input type="range" min="1" max="100" value="50" class="rangeslider" id="timer_range">
+      </div>
     </div>
     
    

src/main.cpp

@@ -2,8 +2,39 @@
 #include <Wire.h>
 
 #include "PCA9685.h"
+#include <GDBStub.h>
+
+#define ESP12_LED 2
+#define NODEMCU_LED 16
+
+extern "C" {
+#include "user_interface.h"
+}
+os_timer_t Timer1;         // Verwaltungsstruktur des Timers
+
+int c;
+bool toggle = false;
+uint32_t m=0;
+
+uint32_t dimmtimer = 0; 
+uint8_t direction = 1;
+uint8_t onoff = 1;
+
+
+void ledsequence(uint8_t direction, uint8_t onoff, uint8_t factor);
+uint8_t softstart_led(uint8_t led, uint16_t startval, uint16_t stopval, uint8_t factor);
+
+void timerCallback(void *pArg)
+{
+  *((int *) pArg) += 1;
+  
+  ledsequence(direction, onoff, 4);
+  // Serial.print("[");
+  // Serial.print(micros()-m);
+  // Serial.print("] timerCallback\n");
+  // m = micros();
+}
 
-// Änderung
 // OTA & WEB
 #include "wifi_credentials.h"
 #include <ESP8266WiFi.h>
@@ -144,17 +175,18 @@ void setup_pwm_pca9685() {
   pwmController.init(B000000);        // Address pins A5-A0 set to B000000
   pwmController.setPWMFrequency(200); // Default is 200Hz, supports 24Hz to 1526Hz
 
-  pwmController.setChannelPWM(0, 128 << 4); // Set PWM to 128/255, but in 4096 land
-  
   Serial.println(pwmController.getChannelPWM(0)); // Should output 2048, which is 128 << 4
 }
 
-
-
 void setup() {
-  Serial.begin(115200);
+  Serial.begin(460800);
+  gdbstub_init();
+
   Serial.println(F("Booting ...."));
 
+  pinMode(NODEMCU_LED, OUTPUT);
+  pinMode(ESP12_LED, OUTPUT);
+
   Wire.begin();                       // Wire must be started first
   Wire.setClock(400000);              // Supported baud rates are 100kHz, 400kHz, and 1000kHz
 
@@ -166,7 +198,11 @@ void setup() {
     delay(5000);
     ESP.restart();
   }
- 
+
+  os_timer_setfn(&Timer1, timerCallback, &c);
+  os_timer_arm(&Timer1, 1, true);
+
+
   Serial.println("Ready");
   Serial.print("IP address: ");
   Serial.println(WiFi.localIP());
@@ -205,7 +241,7 @@ uint8_t softstart_led(uint8_t led, uint16_t startval, uint16_t stopval, uint8_t
     return 1;
 }
 
-#define LEDCOUNT 13
+#define LEDCOUNT 16
 
 void ledsequence(uint8_t direction, uint8_t onoff, uint8_t factor){
   static int8_t led = 0;
@@ -221,10 +257,20 @@ void ledsequence(uint8_t direction, uint8_t onoff, uint8_t factor){
     finish = 0;                               // set state unfinished -> start action
     if(direction) led = 0;                    // reset led counter depending of direction
     else          led = LEDCOUNT-1;
-    if(onoff)     brightness = 127;           // set brightness value depending of on/off
+    if(onoff){
-    else          brightness = 0;
+      brightness = 127;           // set brightness value depending of on/off
+      lastbrightness = 0;
+    }     
+    else{
+      brightness = 0;
+      lastbrightness = 127;
+    }          
     status = status_build;                    // set parameter memory
-    Serial.println("----Status Changed!");
+    Serial.print("----Status Changed! onoff: ");
+    Serial.print(onoff);
+    Serial.print(" dir: ");
+    Serial.println(direction);
+
   }
   if(!finish){                                // finish == 0 -> action pending
       if(!softstart_led(led,lastbrightness, brightness, factor)){
@@ -238,13 +284,13 @@ void ledsequence(uint8_t direction, uint8_t onoff, uint8_t factor){
           led++;
           if(led >= LEDCOUNT) {
             finish = 1;
-            lastbrightness = brightness;
+            //lastbrightness = brightness;
             }
         } 
         else{
            led--;
            if(led < 0){
-             lastbrightness = brightness;
+             //lastbrightness = brightness;
              finish = 1;
             }
         }
@@ -254,46 +300,18 @@ void ledsequence(uint8_t direction, uint8_t onoff, uint8_t factor){
 
 
 void loop() {
-<<<<<<< HEAD
-  static uint32_t dimmtimer = 0; 
- /* static uint8_t led = 0;
-  static uint16_t brightness = 127;
-  static uint16_t lastbrightness = 0;
 
-  if(millis() - dimmtimer > 2){
-    if(softstart_led(led, lastbrightness, brightness)){
-      // do nothing
-    }
-    else{
-      if(led < LEDCOUNT-1)     led++;
-      else {
-        led = 0;
-        uint16_t mem = lastbrightness;
-        lastbrightness = brightness;
-        brightness = mem;
-      }
-      softstart_led((led), lastbrightness, brightness);
-    }
-    if(led >= LEDCOUNT){
-      //led = 0;
-      //uint16_t mem = lastbrightness;
-      //lastbrightness = brightness;
-     // brightness = mem;
-    }
-    dimmtimer = millis();
-  }*/
-
-  static uint8_t direction = 1;
-  static uint8_t onoff = 1;
-  if(millis() - dimmtimer > 2){
-    ledsequence(direction, onoff, 4);
-  }
-  if(millis() > 25000) onoff = 0;
-  TIMEIF_US("OTA", ArduinoOTA.handle(), 20000);  
-  TIMEIF_US("HTTP", server.handleClient(), 20000);
-=======
-  TIMEIF_US("OTA", ArduinoOTA.handle(), 1000);
   
+
+  if(millis() - dimmtimer > 2){
+    //ledsequence(direction, onoff, 4);
+    dimmtimer = millis();
+  }
+  if(millis() > 25000 && onoff == 1 && direction == 1) onoff = 0;
+  if(millis() > 35000 && direction == 1){
+    onoff = 1;
+    direction = 0;    
+  }
+  TIMEIF_US("OTA", ArduinoOTA.handle(), 1000);
   TIMEIF_US("HTTP", server.handleClient(), 1000);
->>>>>>> d0b824963bd79fc436b4b312e49b48081860d8d4
 }