ESP8266_Treppenlicht/src/main.cpp

#include <Arduino.h>

#ifdef WITH_DEBUGGING_ON
#include <GDBStub.h> // debugging support via GDBStub over UART
#endif

#include "PCA9685.h"
extern "C" { 
  #include "user_interface.h" 
}
// OTA & WEB
#include <ESP8266WiFi.h>
#include <WiFiUdp.h>
#include <ArduinoOTA.h>
#include "ota.h"

#include "wifi_credentials.h"
#include "httpserver.h"

// BOARD
#define ESP12_LED 2
#define NODEMCU_LED 16

// PWM
os_timer_t timer1;
uint8_t timer_flag = 0;
PCA9685 pwmController;

void setup_pwm_pca9685();

// WIFI
const char* ssid = STASSID;
const char* password = STAPSK;

// PWM
uint32_t dimmtimer = 0; 
uint16_t time_per_stair = 500;    // global parameter: dimmtime per stair [ms]
uint8_t direction = 1;
uint8_t onoff = 1;


void ledsequence(uint8_t direction, uint8_t onoff);
uint8_t softstart_led(uint8_t led, uint16_t startval, uint16_t stopval);

void timerCallback(void *pArg)
{
  *((int *) pArg) += 1;
  
  ledsequence(direction, onoff);
  // Serial.print("[");
  // Serial.print(micros()-m);
  // Serial.print("] timerCallback\n");
  // m = micros();
}

// HTTP
void handleNotFound();
HTTPServer httpServer(80, "/");

uint32_t _t=0;
#define SP_US(_str,_a) Serial.print(_str); Serial.print(" took: "); Serial.print(_a); Serial.println("us")
#define TIMEIF_US(_f, _l, _str) _t=micros(); _f; _t=micros()-_t; if(_t > _l) { SP_US(_str, _t); }
// ===============================================


void handleNotFound() {
  String message = "File Not Found\n\n";
  message += "URI: ";
  message += httpServer.uri();
  message += "\nMethod: ";
  message += (httpServer.method() == HTTP_GET) ? "GET" : "POST";
  message += "\nArguments: ";
  message += httpServer.args();
  message += "\n";

  for (uint8_t i = 0; i < httpServer.args(); i++) {
    message += " " + httpServer.argName(i) + ": " + httpServer.arg(i) + "\n";
  }

  httpServer.send(404, "text/plain", message);
}

void setup_pwm_pca9685() {
  pwmController.resetDevices();       // Software resets all PCA9685 devices on Wire line

  pwmController.init(B000000);        // Address pins A5-A0 set to B000000
  pwmController.setPWMFrequency(200); // Default is 200Hz, supports 24Hz to 1526Hz

  Serial.println(pwmController.getChannelPWM(0)); // Should output 2048, which is 128 << 4
}


uint8_t softstart_led(uint8_t led, uint16_t startval, uint16_t stopval){

  /*
  softstart task

  - get's called at regular intervals (1ms at the moment)
  - dimms single led (0 - 15, PCA9685 outputs) with linear intervals vom startval to stopval
  - calculates pwm steps depending on startval, stopval and timeinterval
  - -> results in constanst speed
  - returns 1 if led dimming is running
  - returns 0 if led dimming is finished

  */

    static uint8_t lastled = 255;
    static float current_pwm = 0;
    static float stepsize = 1.0;
    if(led != lastled){
      pwmController.setChannelPWM(led, (uint16_t)startval);
      lastled = led;
      current_pwm = startval;
      stepsize = 20*abs(stopval - startval)/(float)time_per_stair;      // only valid at 1ms function call interval
      return 1;
    }
    
    if(current_pwm > stopval - stepsize && current_pwm < stopval + stepsize) return 0;
    // todo: duty cycle zero!
    if(startval > stopval){
      current_pwm -= stepsize;
    }
    else {
      current_pwm += stepsize;
    }
    Serial.println((uint16_t)current_pwm);
    pwmController.setChannelPWM(led, (uint16_t)current_pwm);
    return 1;
}

#define LEDCOUNT 16

void ledsequence(uint8_t direction, uint8_t onoff){
  static int8_t led = 0;
  static uint16_t brightness = 0;
  static uint16_t lastbrightness = 0;
  static uint8_t finish = 1;
  static uint16_t status = 0;
  uint16_t status_build = 0;
  status_build |= direction << 8;
  status_build |= onoff;
  if(status_build != status){                 // check if any parameter changed
    finish = 0;                               // set state unfinished -> start action
    if(direction) led = 0;                    // reset led counter depending of direction
    else          led = LEDCOUNT-1;
    if(onoff){
      brightness = 2048;           // set brightness value depending of on/off
      lastbrightness = 200;
    }     
    else{
      brightness = 200;
      lastbrightness = 2048;
    }          
    status = status_build;                    // set parameter memory
    Serial.print("----Status Changed! onoff: ");
    Serial.print(onoff);
    Serial.print(" dir: ");
    Serial.println(direction);

  }
  if(!finish){                                // finish == 0 -> action pending
      if(!softstart_led(led,lastbrightness, brightness)){
        Serial.print("one LED finished: ");
        Serial.print(led);
        Serial.print(" last: ");
        Serial.print(lastbrightness);
        Serial.print(" curr: ");
        Serial.println(brightness);
        if(direction){
          led++;
          if(led >= LEDCOUNT) {
            finish = 1;
            //lastbrightness = brightness;
            }
        } 
        else{
           led--;
           if(led < 0){
             //lastbrightness = brightness;
             finish = 1;
            }
        }
      }
  }
}


void setup() {
#ifdef WITH_DEBUGGING_ON
  Serial.begin(460800);
  gdbstub_init();
#else
  Serial.begin(115200);
#endif

  Serial.println(F("Booting ...."));

  pinMode(NODEMCU_LED, OUTPUT);
  pinMode(ESP12_LED, OUTPUT);

  Wire.begin();                       // Wire must be started first
  Wire.setClock(1000000);              // Supported baud rates are 100kHz, 400kHz, and 1000kHz

  WiFi.mode(WIFI_STA);
  WiFi.begin(ssid, password);

  while (WiFi.waitForConnectResult() != WL_CONNECTED) {
    Serial.println("Connection Failed! Rebooting...");
    delay(5000);
    ESP.restart();
  }

  Serial.println("");
  Serial.print("Connected to ");
  Serial.println(ssid);
  Serial.print("IP address: ");
  Serial.println(WiFi.localIP());

  ota_setup();

  httpServer.start();
  httpServer.onNotFound(handleNotFound);
  Serial.println("HTTP server started !");

  setup_pwm_pca9685();
  Serial.println("PCA9685 connected !");

  os_timer_setfn(&timer1, timerCallback, &timer_flag);
  os_timer_arm(&timer1, 20, true);
}

void loop() {
  if(millis() > 25000 && onoff == 1 && direction == 1) onoff = 0;
  if(millis() > 45000 && direction == 1){
    onoff = 1;
    direction = 0;
  }
  TIMEIF_US(ArduinoOTA.handle(), 1000, "OTA");
  TIMEIF_US(httpServer.handleClient(), 1000, "HTTP");
}