signal_processing_vorlage/hardware/signal_processing/fft.vhd

------------------------------------------------------------------------
-- fft
--
-- calculation of FFT magnitude
--
-- Inputs:
-- 32-Bit Floating Point number in range +-16 expected (loaded from FIFO)
--
-- Outputs
-- 32-Bit Floating Point number in range +-16 calculated (stored in FIFO)
--
-----------------------------------------------------------------------
library ieee;
    use ieee.std_logic_1164.all;
    use ieee.numeric_std.all;

library work;
    use work.reg32.all;
    use work.task.all;
	 use work.float.all;

entity fft is
  generic (

    -- input data width of real/img part
      input_data_width : integer := 32;

    -- output data width of real/img part
      output_data_width : integer := 32

    );
    port (
        clk : in std_logic;
        reset : in std_logic;

        task_start : in std_logic;
        task_state : out work.task.State;

        signal_read : out std_logic;
        signal_readdata : in std_logic_vector( 31 downto 0 );

        signal_write : out std_logic;
        signal_writedata : out std_logic_vector( 31 downto 0 )
    );
end entity fft;

architecture rtl of fft is

    signal current_task_state : work.task.State;
    signal next_task_state : work.task.State;
    signal index : integer range 0 to work.task.STREAM_LEN;

begin
    task_state_transitions : process ( current_task_state, task_start, index ) is
    begin
        next_task_state <= current_task_state;
        case current_task_state is
            when work.task.TASK_IDLE =>
                if ( task_start = '1' ) then
                    next_task_state <= work.task.TASK_RUNNING;
                end if;
            when work.task.TASK_RUNNING =>
                if ( index = work.task.STREAM_LEN - 1 ) then
                    next_task_state <= work.task.TASK_DONE;
                end if;
            when work.task.TASK_DONE =>
                if ( task_start = '1' ) then
                    next_task_state <= work.task.TASK_RUNNING;
                end if;
        end case;
    end process task_state_transitions;

    sync : process ( clk, reset ) is
    begin
        if ( reset = '1' ) then
            current_task_state <= work.task.TASK_IDLE;
            index <= 0;
        elsif ( rising_edge( clk ) ) then
            current_task_state <= next_task_state;
            case next_task_state is
            when work.task.TASK_IDLE =>
                index <= 0;
                signal_write <= '0';
            when work.task.TASK_RUNNING =>
                index <= index + 1;
                signal_write <= '1';
                signal_writedata <= ( others => '0' );
            when work.task.TASK_DONE =>
                index <= 0;
                signal_write <= '0';
            end case;
        end if;
    end process sync;

    task_state <= current_task_state;

end architecture rtl;