/** ****************************************************************************** * @file stm32l1xx_nucleo.h * @author MCD Application Team * @brief This file contains definitions for: * - LEDs and push-button available on STM32L1XX-Nucleo Kit * from STMicroelectronics * - LCD, joystick and microSD available on Adafruit 1.8 TFT LCD * shield (reference ID 802) ****************************************************************************** * @attention * *

© Copyright (c) 2017 STMicroelectronics. * All rights reserved.

* * This software component is licensed by ST under BSD 3-Clause license, * the "License"; You may not use this file except in compliance with the * License. You may obtain a copy of the License at: * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32L1XX_NUCLEO_H #define __STM32L1XX_NUCLEO_H #ifdef __cplusplus extern "C" { #endif /** @addtogroup BSP * @{ */ /** @addtogroup STM32L1XX_NUCLEO * @{ */ /* Includes ------------------------------------------------------------------*/ #include "stm32l1xx_hal.h" /** @defgroup STM32L1XX_NUCLEO_Exported_Types Exported Types * @{ */ typedef enum { LED2 = 0, LED_GREEN = LED2 } Led_TypeDef; typedef enum { BUTTON_USER = 0, /* Alias */ BUTTON_KEY = BUTTON_USER } Button_TypeDef; typedef enum { BUTTON_MODE_GPIO = 0, BUTTON_MODE_EXTI = 1 } ButtonMode_TypeDef; typedef enum { JOY_NONE = 0, JOY_SEL = 1, JOY_DOWN = 2, JOY_LEFT = 3, JOY_RIGHT = 4, JOY_UP = 5 } JOYState_TypeDef; /** * @} */ /** @defgroup STM32L1XX_NUCLEO_Exported_Constants Exported Constants * @{ */ /** * @brief Define for STM32L1xx_NUCLEO board */ #if !defined (USE_STM32L1xx_NUCLEO) #define USE_STM32L1xx_NUCLEO #endif /** @defgroup STM32L1XX_NUCLEO_LED LED Constants * @{ */ #define LEDn 1 #define LED2_PIN GPIO_PIN_5 #define LED2_GPIO_PORT GPIOA #define LED2_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() #define LED2_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE() #define LEDx_GPIO_CLK_ENABLE(__INDEX__) do { if((__INDEX__) == 0) LED2_GPIO_CLK_ENABLE();} while(0) #define LEDx_GPIO_CLK_DISABLE(__INDEX__) (((__INDEX__) == 0) ? LED2_GPIO_CLK_DISABLE() : 0) /** * @} */ /** @defgroup STM32L1XX_NUCLEO_BUTTON BUTTON Constants * @{ */ #define BUTTONn 1 /** * @brief User push-button */ #define USER_BUTTON_PIN GPIO_PIN_13 #define USER_BUTTON_GPIO_PORT GPIOC #define USER_BUTTON_GPIO_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE() #define USER_BUTTON_GPIO_CLK_DISABLE() __HAL_RCC_GPIOC_CLK_DISABLE() #define USER_BUTTON_EXTI_IRQn EXTI15_10_IRQn /* Aliases */ #define KEY_BUTTON_PIN USER_BUTTON_PIN #define KEY_BUTTON_GPIO_PORT USER_BUTTON_GPIO_PORT #define KEY_BUTTON_GPIO_CLK_ENABLE() USER_BUTTON_GPIO_CLK_ENABLE() #define KEY_BUTTON_GPIO_CLK_DISABLE() USER_BUTTON_GPIO_CLK_DISABLE() #define KEY_BUTTON_EXTI_IRQn USER_BUTTON_EXTI_IRQn #define BUTTONx_GPIO_CLK_ENABLE(__INDEX__) do { if((__INDEX__) == 0) USER_BUTTON_GPIO_CLK_ENABLE();} while(0) #define BUTTONx_GPIO_CLK_DISABLE(__INDEX__) (((__INDEX__) == 0) ? USER_BUTTON_GPIO_CLK_DISABLE() : 0) /** * @} */ /** @addtogroup STM32L1XX_NUCLEO_BUS BUS Constants * @{ */ /*###################### SPI1 ###################################*/ #define NUCLEO_SPIx SPI1 #define NUCLEO_SPIx_CLK_ENABLE() __HAL_RCC_SPI1_CLK_ENABLE() #define NUCLEO_SPIx_SCK_AF GPIO_AF5_SPI1 #define NUCLEO_SPIx_SCK_GPIO_PORT GPIOA #define NUCLEO_SPIx_SCK_PIN GPIO_PIN_5 #define NUCLEO_SPIx_SCK_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() #define NUCLEO_SPIx_SCK_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE() #define NUCLEO_SPIx_MISO_MOSI_AF GPIO_AF5_SPI1 #define NUCLEO_SPIx_MISO_MOSI_GPIO_PORT GPIOA #define NUCLEO_SPIx_MISO_MOSI_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() #define NUCLEO_SPIx_MISO_MOSI_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE() #define NUCLEO_SPIx_MISO_PIN GPIO_PIN_6 #define NUCLEO_SPIx_MOSI_PIN GPIO_PIN_7 /* Maximum Timeout values for flags waiting loops. These timeouts are not based on accurate values, they just guarantee that the application will not remain stuck if the SPI communication is corrupted. You may modify these timeout values depending on CPU frequency and application conditions (interrupts routines ...). */ #define NUCLEO_SPIx_TIMEOUT_MAX 1000 /** * @brief SD Control Lines management */ #define SD_CS_LOW() HAL_GPIO_WritePin(SD_CS_GPIO_PORT, SD_CS_PIN, GPIO_PIN_RESET) #define SD_CS_HIGH() HAL_GPIO_WritePin(SD_CS_GPIO_PORT, SD_CS_PIN, GPIO_PIN_SET) /** * @brief LCD Control Lines management */ #define LCD_CS_LOW() HAL_GPIO_WritePin(LCD_CS_GPIO_PORT, LCD_CS_PIN, GPIO_PIN_RESET) #define LCD_CS_HIGH() HAL_GPIO_WritePin(LCD_CS_GPIO_PORT, LCD_CS_PIN, GPIO_PIN_SET) #define LCD_DC_LOW() HAL_GPIO_WritePin(LCD_DC_GPIO_PORT, LCD_DC_PIN, GPIO_PIN_RESET) #define LCD_DC_HIGH() HAL_GPIO_WritePin(LCD_DC_GPIO_PORT, LCD_DC_PIN, GPIO_PIN_SET) /** * @brief SD Control Interface pins (shield D4) */ #define SD_CS_PIN GPIO_PIN_5 #define SD_CS_GPIO_PORT GPIOB #define SD_CS_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() #define SD_CS_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE() /** * @brief LCD Control Interface pins (shield D10) */ #define LCD_CS_PIN GPIO_PIN_6 #define LCD_CS_GPIO_PORT GPIOB #define LCD_CS_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() #define LCD_CS_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE() /** * @brief LCD Data/Command Interface pins */ #define LCD_DC_PIN GPIO_PIN_9 #define LCD_DC_GPIO_PORT GPIOA #define LCD_DC_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() #define LCD_DC_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE() /*##################### ADC1 ###################################*/ /** * @brief ADC Interface pins * used to detect motion of Joystick available on Adafruit 1.8 TFT shield */ #define NUCLEO_ADCx ADC1 #define NUCLEO_ADCx_CLK_ENABLE() __HAL_RCC_ADC1_CLK_ENABLE() #define NUCLEO_ADCx_CLK_DISABLE() __HAL_RCC_ADC1_CLK_DISABLE() #define NUCLEO_ADCx_GPIO_PORT GPIOB #define NUCLEO_ADCx_GPIO_PIN GPIO_PIN_0 #define NUCLEO_ADCx_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() #define NUCLEO_ADCx_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE() /** * @} */ /** * @} */ /** @addtogroup STM32L1XX_NUCLEO_Exported_Functions * @{ */ uint32_t BSP_GetVersion(void); /** @addtogroup STM32L1XX_NUCLEO_LED_Functions * @{ */ void BSP_LED_Init(Led_TypeDef Led); void BSP_LED_DeInit(Led_TypeDef Led); void BSP_LED_On(Led_TypeDef Led); void BSP_LED_Off(Led_TypeDef Led); void BSP_LED_Toggle(Led_TypeDef Led); /** * @} */ /** @addtogroup STM32L1XX_NUCLEO_BUTTON_Functions * @{ */ void BSP_PB_Init(Button_TypeDef Button, ButtonMode_TypeDef ButtonMode); void BSP_PB_DeInit(Button_TypeDef Button); uint32_t BSP_PB_GetState(Button_TypeDef Button); #if defined(HAL_ADC_MODULE_ENABLED) uint8_t BSP_JOY_Init(void); JOYState_TypeDef BSP_JOY_GetState(void); void BSP_JOY_DeInit(void); #endif /* HAL_ADC_MODULE_ENABLED */ /** * @} */ /** * @} */ /** * @} */ /** * @} */ #ifdef __cplusplus } #endif #endif /* __STM32L1XX_NUCLEO_H */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/