/** ****************************************************************************** * @file stm32l1xx_ll_tim.c * @author MCD Application Team * @brief TIM LL module driver. ****************************************************************************** * @attention * *

© Copyright (c) 2016 STMicroelectronics. * All rights reserved.

* * This software component is licensed by ST under BSD 3-Clause license, * the "License"; You may not use this file except in compliance with the * License. You may obtain a copy of the License at: * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ #if defined(USE_FULL_LL_DRIVER) /* Includes ------------------------------------------------------------------*/ #include "stm32l1xx_ll_tim.h" #include "stm32l1xx_ll_bus.h" #ifdef USE_FULL_ASSERT #include "stm32_assert.h" #else #define assert_param(expr) ((void)0U) #endif /** @addtogroup STM32L1xx_LL_Driver * @{ */ #if defined (TIM2) || defined (TIM3) || defined (TIM4) || defined (TIM5) || defined (TIM9) || defined (TIM10) || defined (TIM11) || defined (TIM6) || defined (TIM7) /** @addtogroup TIM_LL * @{ */ /* Private types -------------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ /* Private constants ---------------------------------------------------------*/ /* Private macros ------------------------------------------------------------*/ /** @addtogroup TIM_LL_Private_Macros * @{ */ #define IS_LL_TIM_COUNTERMODE(__VALUE__) (((__VALUE__) == LL_TIM_COUNTERMODE_UP) \ || ((__VALUE__) == LL_TIM_COUNTERMODE_DOWN) \ || ((__VALUE__) == LL_TIM_COUNTERMODE_CENTER_UP) \ || ((__VALUE__) == LL_TIM_COUNTERMODE_CENTER_DOWN) \ || ((__VALUE__) == LL_TIM_COUNTERMODE_CENTER_UP_DOWN)) #define IS_LL_TIM_CLOCKDIVISION(__VALUE__) (((__VALUE__) == LL_TIM_CLOCKDIVISION_DIV1) \ || ((__VALUE__) == LL_TIM_CLOCKDIVISION_DIV2) \ || ((__VALUE__) == LL_TIM_CLOCKDIVISION_DIV4)) #define IS_LL_TIM_OCMODE(__VALUE__) (((__VALUE__) == LL_TIM_OCMODE_FROZEN) \ || ((__VALUE__) == LL_TIM_OCMODE_ACTIVE) \ || ((__VALUE__) == LL_TIM_OCMODE_INACTIVE) \ || ((__VALUE__) == LL_TIM_OCMODE_TOGGLE) \ || ((__VALUE__) == LL_TIM_OCMODE_FORCED_INACTIVE) \ || ((__VALUE__) == LL_TIM_OCMODE_FORCED_ACTIVE) \ || ((__VALUE__) == LL_TIM_OCMODE_PWM1) \ || ((__VALUE__) == LL_TIM_OCMODE_PWM2)) #define IS_LL_TIM_OCSTATE(__VALUE__) (((__VALUE__) == LL_TIM_OCSTATE_DISABLE) \ || ((__VALUE__) == LL_TIM_OCSTATE_ENABLE)) #define IS_LL_TIM_OCPOLARITY(__VALUE__) (((__VALUE__) == LL_TIM_OCPOLARITY_HIGH) \ || ((__VALUE__) == LL_TIM_OCPOLARITY_LOW)) #define IS_LL_TIM_ACTIVEINPUT(__VALUE__) (((__VALUE__) == LL_TIM_ACTIVEINPUT_DIRECTTI) \ || ((__VALUE__) == LL_TIM_ACTIVEINPUT_INDIRECTTI) \ || ((__VALUE__) == LL_TIM_ACTIVEINPUT_TRC)) #define IS_LL_TIM_ICPSC(__VALUE__) (((__VALUE__) == LL_TIM_ICPSC_DIV1) \ || ((__VALUE__) == LL_TIM_ICPSC_DIV2) \ || ((__VALUE__) == LL_TIM_ICPSC_DIV4) \ || ((__VALUE__) == LL_TIM_ICPSC_DIV8)) #define IS_LL_TIM_IC_FILTER(__VALUE__) (((__VALUE__) == LL_TIM_IC_FILTER_FDIV1) \ || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV1_N2) \ || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV1_N4) \ || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV1_N8) \ || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV2_N6) \ || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV2_N8) \ || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV4_N6) \ || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV4_N8) \ || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV8_N6) \ || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV8_N8) \ || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV16_N5) \ || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV16_N6) \ || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV16_N8) \ || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV32_N5) \ || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV32_N6) \ || ((__VALUE__) == LL_TIM_IC_FILTER_FDIV32_N8)) #define IS_LL_TIM_IC_POLARITY(__VALUE__) (((__VALUE__) == LL_TIM_IC_POLARITY_RISING) \ || ((__VALUE__) == LL_TIM_IC_POLARITY_FALLING) \ || ((__VALUE__) == LL_TIM_IC_POLARITY_BOTHEDGE)) #define IS_LL_TIM_ENCODERMODE(__VALUE__) (((__VALUE__) == LL_TIM_ENCODERMODE_X2_TI1) \ || ((__VALUE__) == LL_TIM_ENCODERMODE_X2_TI2) \ || ((__VALUE__) == LL_TIM_ENCODERMODE_X4_TI12)) #define IS_LL_TIM_IC_POLARITY_ENCODER(__VALUE__) (((__VALUE__) == LL_TIM_IC_POLARITY_RISING) \ || ((__VALUE__) == LL_TIM_IC_POLARITY_FALLING)) /** * @} */ /* Private function prototypes -----------------------------------------------*/ /** @defgroup TIM_LL_Private_Functions TIM Private Functions * @{ */ static ErrorStatus OC1Config(TIM_TypeDef *TIMx, LL_TIM_OC_InitTypeDef *TIM_OCInitStruct); static ErrorStatus OC2Config(TIM_TypeDef *TIMx, LL_TIM_OC_InitTypeDef *TIM_OCInitStruct); static ErrorStatus OC3Config(TIM_TypeDef *TIMx, LL_TIM_OC_InitTypeDef *TIM_OCInitStruct); static ErrorStatus OC4Config(TIM_TypeDef *TIMx, LL_TIM_OC_InitTypeDef *TIM_OCInitStruct); static ErrorStatus IC1Config(TIM_TypeDef *TIMx, LL_TIM_IC_InitTypeDef *TIM_ICInitStruct); static ErrorStatus IC2Config(TIM_TypeDef *TIMx, LL_TIM_IC_InitTypeDef *TIM_ICInitStruct); static ErrorStatus IC3Config(TIM_TypeDef *TIMx, LL_TIM_IC_InitTypeDef *TIM_ICInitStruct); static ErrorStatus IC4Config(TIM_TypeDef *TIMx, LL_TIM_IC_InitTypeDef *TIM_ICInitStruct); /** * @} */ /* Exported functions --------------------------------------------------------*/ /** @addtogroup TIM_LL_Exported_Functions * @{ */ /** @addtogroup TIM_LL_EF_Init * @{ */ /** * @brief Set TIMx registers to their reset values. * @param TIMx Timer instance * @retval An ErrorStatus enumeration value: * - SUCCESS: TIMx registers are de-initialized * - ERROR: invalid TIMx instance */ ErrorStatus LL_TIM_DeInit(TIM_TypeDef *TIMx) { ErrorStatus result = SUCCESS; /* Check the parameters */ assert_param(IS_TIM_INSTANCE(TIMx)); if (TIMx == TIM2) { LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_TIM2); LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_TIM2); } #if defined(TIM3) else if (TIMx == TIM3) { LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_TIM3); LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_TIM3); } #endif /* TIM3 */ #if defined(TIM4) else if (TIMx == TIM4) { LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_TIM4); LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_TIM4); } #endif /* TIM4 */ #if defined(TIM5) else if (TIMx == TIM5) { LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_TIM5); LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_TIM5); } #endif /* TIM5 */ #if defined(TIM6) else if (TIMx == TIM6) { LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_TIM6); LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_TIM6); } #endif /* TIM6 */ #if defined(TIM7) else if (TIMx == TIM7) { LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_TIM7); LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_TIM7); } #endif /* TIM7 */ #if defined(TIM9) else if (TIMx == TIM9) { LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_TIM9); LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_TIM9); } #endif /* TIM9 */ #if defined(TIM10) else if (TIMx == TIM10) { LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_TIM10); LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_TIM10); } #endif /* TIM10 */ #if defined(TIM11) else if (TIMx == TIM11) { LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_TIM11); LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_TIM11); } #endif /* TIM11 */ else { result = ERROR; } return result; } /** * @brief Set the fields of the time base unit configuration data structure * to their default values. * @param TIM_InitStruct pointer to a @ref LL_TIM_InitTypeDef structure (time base unit configuration data structure) * @retval None */ void LL_TIM_StructInit(LL_TIM_InitTypeDef *TIM_InitStruct) { /* Set the default configuration */ TIM_InitStruct->Prescaler = (uint16_t)0x0000; TIM_InitStruct->CounterMode = LL_TIM_COUNTERMODE_UP; TIM_InitStruct->Autoreload = 0xFFFFFFFFU; TIM_InitStruct->ClockDivision = LL_TIM_CLOCKDIVISION_DIV1; } /** * @brief Configure the TIMx time base unit. * @param TIMx Timer Instance * @param TIM_InitStruct pointer to a @ref LL_TIM_InitTypeDef structure (TIMx time base unit configuration data structure) * @retval An ErrorStatus enumeration value: * - SUCCESS: TIMx registers are de-initialized * - ERROR: not applicable */ ErrorStatus LL_TIM_Init(TIM_TypeDef *TIMx, LL_TIM_InitTypeDef *TIM_InitStruct) { uint32_t tmpcr1; /* Check the parameters */ assert_param(IS_TIM_INSTANCE(TIMx)); assert_param(IS_LL_TIM_COUNTERMODE(TIM_InitStruct->CounterMode)); assert_param(IS_LL_TIM_CLOCKDIVISION(TIM_InitStruct->ClockDivision)); tmpcr1 = LL_TIM_ReadReg(TIMx, CR1); if (IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx)) { /* Select the Counter Mode */ MODIFY_REG(tmpcr1, (TIM_CR1_DIR | TIM_CR1_CMS), TIM_InitStruct->CounterMode); } if (IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx)) { /* Set the clock division */ MODIFY_REG(tmpcr1, TIM_CR1_CKD, TIM_InitStruct->ClockDivision); } /* Write to TIMx CR1 */ LL_TIM_WriteReg(TIMx, CR1, tmpcr1); /* Set the Autoreload value */ LL_TIM_SetAutoReload(TIMx, TIM_InitStruct->Autoreload); /* Set the Prescaler value */ LL_TIM_SetPrescaler(TIMx, TIM_InitStruct->Prescaler); /* Generate an update event to reload the Prescaler and the repetition counter value (if applicable) immediately */ LL_TIM_GenerateEvent_UPDATE(TIMx); return SUCCESS; } /** * @brief Set the fields of the TIMx output channel configuration data * structure to their default values. * @param TIM_OC_InitStruct pointer to a @ref LL_TIM_OC_InitTypeDef structure (the output channel configuration data structure) * @retval None */ void LL_TIM_OC_StructInit(LL_TIM_OC_InitTypeDef *TIM_OC_InitStruct) { /* Set the default configuration */ TIM_OC_InitStruct->OCMode = LL_TIM_OCMODE_FROZEN; TIM_OC_InitStruct->OCState = LL_TIM_OCSTATE_DISABLE; TIM_OC_InitStruct->CompareValue = 0x00000000U; TIM_OC_InitStruct->OCPolarity = LL_TIM_OCPOLARITY_HIGH; } /** * @brief Configure the TIMx output channel. * @param TIMx Timer Instance * @param Channel This parameter can be one of the following values: * @arg @ref LL_TIM_CHANNEL_CH1 * @arg @ref LL_TIM_CHANNEL_CH2 * @arg @ref LL_TIM_CHANNEL_CH3 * @arg @ref LL_TIM_CHANNEL_CH4 * @param TIM_OC_InitStruct pointer to a @ref LL_TIM_OC_InitTypeDef structure (TIMx output channel configuration data structure) * @retval An ErrorStatus enumeration value: * - SUCCESS: TIMx output channel is initialized * - ERROR: TIMx output channel is not initialized */ ErrorStatus LL_TIM_OC_Init(TIM_TypeDef *TIMx, uint32_t Channel, LL_TIM_OC_InitTypeDef *TIM_OC_InitStruct) { ErrorStatus result = ERROR; switch (Channel) { case LL_TIM_CHANNEL_CH1: result = OC1Config(TIMx, TIM_OC_InitStruct); break; case LL_TIM_CHANNEL_CH2: result = OC2Config(TIMx, TIM_OC_InitStruct); break; case LL_TIM_CHANNEL_CH3: result = OC3Config(TIMx, TIM_OC_InitStruct); break; case LL_TIM_CHANNEL_CH4: result = OC4Config(TIMx, TIM_OC_InitStruct); break; default: break; } return result; } /** * @brief Set the fields of the TIMx input channel configuration data * structure to their default values. * @param TIM_ICInitStruct pointer to a @ref LL_TIM_IC_InitTypeDef structure (the input channel configuration data structure) * @retval None */ void LL_TIM_IC_StructInit(LL_TIM_IC_InitTypeDef *TIM_ICInitStruct) { /* Set the default configuration */ TIM_ICInitStruct->ICPolarity = LL_TIM_IC_POLARITY_RISING; TIM_ICInitStruct->ICActiveInput = LL_TIM_ACTIVEINPUT_DIRECTTI; TIM_ICInitStruct->ICPrescaler = LL_TIM_ICPSC_DIV1; TIM_ICInitStruct->ICFilter = LL_TIM_IC_FILTER_FDIV1; } /** * @brief Configure the TIMx input channel. * @param TIMx Timer Instance * @param Channel This parameter can be one of the following values: * @arg @ref LL_TIM_CHANNEL_CH1 * @arg @ref LL_TIM_CHANNEL_CH2 * @arg @ref LL_TIM_CHANNEL_CH3 * @arg @ref LL_TIM_CHANNEL_CH4 * @param TIM_IC_InitStruct pointer to a @ref LL_TIM_IC_InitTypeDef structure (TIMx input channel configuration data structure) * @retval An ErrorStatus enumeration value: * - SUCCESS: TIMx output channel is initialized * - ERROR: TIMx output channel is not initialized */ ErrorStatus LL_TIM_IC_Init(TIM_TypeDef *TIMx, uint32_t Channel, LL_TIM_IC_InitTypeDef *TIM_IC_InitStruct) { ErrorStatus result = ERROR; switch (Channel) { case LL_TIM_CHANNEL_CH1: result = IC1Config(TIMx, TIM_IC_InitStruct); break; case LL_TIM_CHANNEL_CH2: result = IC2Config(TIMx, TIM_IC_InitStruct); break; case LL_TIM_CHANNEL_CH3: result = IC3Config(TIMx, TIM_IC_InitStruct); break; case LL_TIM_CHANNEL_CH4: result = IC4Config(TIMx, TIM_IC_InitStruct); break; default: break; } return result; } /** * @brief Fills each TIM_EncoderInitStruct field with its default value * @param TIM_EncoderInitStruct pointer to a @ref LL_TIM_ENCODER_InitTypeDef structure (encoder interface configuration data structure) * @retval None */ void LL_TIM_ENCODER_StructInit(LL_TIM_ENCODER_InitTypeDef *TIM_EncoderInitStruct) { /* Set the default configuration */ TIM_EncoderInitStruct->EncoderMode = LL_TIM_ENCODERMODE_X2_TI1; TIM_EncoderInitStruct->IC1Polarity = LL_TIM_IC_POLARITY_RISING; TIM_EncoderInitStruct->IC1ActiveInput = LL_TIM_ACTIVEINPUT_DIRECTTI; TIM_EncoderInitStruct->IC1Prescaler = LL_TIM_ICPSC_DIV1; TIM_EncoderInitStruct->IC1Filter = LL_TIM_IC_FILTER_FDIV1; TIM_EncoderInitStruct->IC2Polarity = LL_TIM_IC_POLARITY_RISING; TIM_EncoderInitStruct->IC2ActiveInput = LL_TIM_ACTIVEINPUT_DIRECTTI; TIM_EncoderInitStruct->IC2Prescaler = LL_TIM_ICPSC_DIV1; TIM_EncoderInitStruct->IC2Filter = LL_TIM_IC_FILTER_FDIV1; } /** * @brief Configure the encoder interface of the timer instance. * @param TIMx Timer Instance * @param TIM_EncoderInitStruct pointer to a @ref LL_TIM_ENCODER_InitTypeDef structure (TIMx encoder interface configuration data structure) * @retval An ErrorStatus enumeration value: * - SUCCESS: TIMx registers are de-initialized * - ERROR: not applicable */ ErrorStatus LL_TIM_ENCODER_Init(TIM_TypeDef *TIMx, LL_TIM_ENCODER_InitTypeDef *TIM_EncoderInitStruct) { uint32_t tmpccmr1; uint32_t tmpccer; /* Check the parameters */ assert_param(IS_TIM_ENCODER_INTERFACE_INSTANCE(TIMx)); assert_param(IS_LL_TIM_ENCODERMODE(TIM_EncoderInitStruct->EncoderMode)); assert_param(IS_LL_TIM_IC_POLARITY_ENCODER(TIM_EncoderInitStruct->IC1Polarity)); assert_param(IS_LL_TIM_ACTIVEINPUT(TIM_EncoderInitStruct->IC1ActiveInput)); assert_param(IS_LL_TIM_ICPSC(TIM_EncoderInitStruct->IC1Prescaler)); assert_param(IS_LL_TIM_IC_FILTER(TIM_EncoderInitStruct->IC1Filter)); assert_param(IS_LL_TIM_IC_POLARITY_ENCODER(TIM_EncoderInitStruct->IC2Polarity)); assert_param(IS_LL_TIM_ACTIVEINPUT(TIM_EncoderInitStruct->IC2ActiveInput)); assert_param(IS_LL_TIM_ICPSC(TIM_EncoderInitStruct->IC2Prescaler)); assert_param(IS_LL_TIM_IC_FILTER(TIM_EncoderInitStruct->IC2Filter)); /* Disable the CC1 and CC2: Reset the CC1E and CC2E Bits */ TIMx->CCER &= (uint32_t)~(TIM_CCER_CC1E | TIM_CCER_CC2E); /* Get the TIMx CCMR1 register value */ tmpccmr1 = LL_TIM_ReadReg(TIMx, CCMR1); /* Get the TIMx CCER register value */ tmpccer = LL_TIM_ReadReg(TIMx, CCER); /* Configure TI1 */ tmpccmr1 &= (uint32_t)~(TIM_CCMR1_CC1S | TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC); tmpccmr1 |= (uint32_t)(TIM_EncoderInitStruct->IC1ActiveInput >> 16U); tmpccmr1 |= (uint32_t)(TIM_EncoderInitStruct->IC1Filter >> 16U); tmpccmr1 |= (uint32_t)(TIM_EncoderInitStruct->IC1Prescaler >> 16U); /* Configure TI2 */ tmpccmr1 &= (uint32_t)~(TIM_CCMR1_CC2S | TIM_CCMR1_IC2F | TIM_CCMR1_IC2PSC); tmpccmr1 |= (uint32_t)(TIM_EncoderInitStruct->IC2ActiveInput >> 8U); tmpccmr1 |= (uint32_t)(TIM_EncoderInitStruct->IC2Filter >> 8U); tmpccmr1 |= (uint32_t)(TIM_EncoderInitStruct->IC2Prescaler >> 8U); /* Set TI1 and TI2 polarity and enable TI1 and TI2 */ tmpccer &= (uint32_t)~(TIM_CCER_CC1P | TIM_CCER_CC1NP | TIM_CCER_CC2P | TIM_CCER_CC2NP); tmpccer |= (uint32_t)(TIM_EncoderInitStruct->IC1Polarity); tmpccer |= (uint32_t)(TIM_EncoderInitStruct->IC2Polarity << 4U); tmpccer |= (uint32_t)(TIM_CCER_CC1E | TIM_CCER_CC2E); /* Set encoder mode */ LL_TIM_SetEncoderMode(TIMx, TIM_EncoderInitStruct->EncoderMode); /* Write to TIMx CCMR1 */ LL_TIM_WriteReg(TIMx, CCMR1, tmpccmr1); /* Write to TIMx CCER */ LL_TIM_WriteReg(TIMx, CCER, tmpccer); return SUCCESS; } /** * @} */ /** * @} */ /** @addtogroup TIM_LL_Private_Functions TIM Private Functions * @brief Private functions * @{ */ /** * @brief Configure the TIMx output channel 1. * @param TIMx Timer Instance * @param TIM_OCInitStruct pointer to the the TIMx output channel 1 configuration data structure * @retval An ErrorStatus enumeration value: * - SUCCESS: TIMx registers are de-initialized * - ERROR: not applicable */ static ErrorStatus OC1Config(TIM_TypeDef *TIMx, LL_TIM_OC_InitTypeDef *TIM_OCInitStruct) { uint32_t tmpccmr1; uint32_t tmpccer; uint32_t tmpcr2; /* Check the parameters */ assert_param(IS_TIM_CC1_INSTANCE(TIMx)); assert_param(IS_LL_TIM_OCMODE(TIM_OCInitStruct->OCMode)); assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCState)); assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCPolarity)); /* Disable the Channel 1: Reset the CC1E Bit */ CLEAR_BIT(TIMx->CCER, TIM_CCER_CC1E); /* Get the TIMx CCER register value */ tmpccer = LL_TIM_ReadReg(TIMx, CCER); /* Get the TIMx CR2 register value */ tmpcr2 = LL_TIM_ReadReg(TIMx, CR2); /* Get the TIMx CCMR1 register value */ tmpccmr1 = LL_TIM_ReadReg(TIMx, CCMR1); /* Reset Capture/Compare selection Bits */ CLEAR_BIT(tmpccmr1, TIM_CCMR1_CC1S); /* Set the Output Compare Mode */ MODIFY_REG(tmpccmr1, TIM_CCMR1_OC1M, TIM_OCInitStruct->OCMode); /* Set the Output Compare Polarity */ MODIFY_REG(tmpccer, TIM_CCER_CC1P, TIM_OCInitStruct->OCPolarity); /* Set the Output State */ MODIFY_REG(tmpccer, TIM_CCER_CC1E, TIM_OCInitStruct->OCState); /* Write to TIMx CR2 */ LL_TIM_WriteReg(TIMx, CR2, tmpcr2); /* Write to TIMx CCMR1 */ LL_TIM_WriteReg(TIMx, CCMR1, tmpccmr1); /* Set the Capture Compare Register value */ LL_TIM_OC_SetCompareCH1(TIMx, TIM_OCInitStruct->CompareValue); /* Write to TIMx CCER */ LL_TIM_WriteReg(TIMx, CCER, tmpccer); return SUCCESS; } /** * @brief Configure the TIMx output channel 2. * @param TIMx Timer Instance * @param TIM_OCInitStruct pointer to the the TIMx output channel 2 configuration data structure * @retval An ErrorStatus enumeration value: * - SUCCESS: TIMx registers are de-initialized * - ERROR: not applicable */ static ErrorStatus OC2Config(TIM_TypeDef *TIMx, LL_TIM_OC_InitTypeDef *TIM_OCInitStruct) { uint32_t tmpccmr1; uint32_t tmpccer; uint32_t tmpcr2; /* Check the parameters */ assert_param(IS_TIM_CC2_INSTANCE(TIMx)); assert_param(IS_LL_TIM_OCMODE(TIM_OCInitStruct->OCMode)); assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCState)); assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCPolarity)); /* Disable the Channel 2: Reset the CC2E Bit */ CLEAR_BIT(TIMx->CCER, TIM_CCER_CC2E); /* Get the TIMx CCER register value */ tmpccer = LL_TIM_ReadReg(TIMx, CCER); /* Get the TIMx CR2 register value */ tmpcr2 = LL_TIM_ReadReg(TIMx, CR2); /* Get the TIMx CCMR1 register value */ tmpccmr1 = LL_TIM_ReadReg(TIMx, CCMR1); /* Reset Capture/Compare selection Bits */ CLEAR_BIT(tmpccmr1, TIM_CCMR1_CC2S); /* Select the Output Compare Mode */ MODIFY_REG(tmpccmr1, TIM_CCMR1_OC2M, TIM_OCInitStruct->OCMode << 8U); /* Set the Output Compare Polarity */ MODIFY_REG(tmpccer, TIM_CCER_CC2P, TIM_OCInitStruct->OCPolarity << 4U); /* Set the Output State */ MODIFY_REG(tmpccer, TIM_CCER_CC2E, TIM_OCInitStruct->OCState << 4U); /* Write to TIMx CR2 */ LL_TIM_WriteReg(TIMx, CR2, tmpcr2); /* Write to TIMx CCMR1 */ LL_TIM_WriteReg(TIMx, CCMR1, tmpccmr1); /* Set the Capture Compare Register value */ LL_TIM_OC_SetCompareCH2(TIMx, TIM_OCInitStruct->CompareValue); /* Write to TIMx CCER */ LL_TIM_WriteReg(TIMx, CCER, tmpccer); return SUCCESS; } /** * @brief Configure the TIMx output channel 3. * @param TIMx Timer Instance * @param TIM_OCInitStruct pointer to the the TIMx output channel 3 configuration data structure * @retval An ErrorStatus enumeration value: * - SUCCESS: TIMx registers are de-initialized * - ERROR: not applicable */ static ErrorStatus OC3Config(TIM_TypeDef *TIMx, LL_TIM_OC_InitTypeDef *TIM_OCInitStruct) { uint32_t tmpccmr2; uint32_t tmpccer; uint32_t tmpcr2; /* Check the parameters */ assert_param(IS_TIM_CC3_INSTANCE(TIMx)); assert_param(IS_LL_TIM_OCMODE(TIM_OCInitStruct->OCMode)); assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCState)); assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCPolarity)); /* Disable the Channel 3: Reset the CC3E Bit */ CLEAR_BIT(TIMx->CCER, TIM_CCER_CC3E); /* Get the TIMx CCER register value */ tmpccer = LL_TIM_ReadReg(TIMx, CCER); /* Get the TIMx CR2 register value */ tmpcr2 = LL_TIM_ReadReg(TIMx, CR2); /* Get the TIMx CCMR2 register value */ tmpccmr2 = LL_TIM_ReadReg(TIMx, CCMR2); /* Reset Capture/Compare selection Bits */ CLEAR_BIT(tmpccmr2, TIM_CCMR2_CC3S); /* Select the Output Compare Mode */ MODIFY_REG(tmpccmr2, TIM_CCMR2_OC3M, TIM_OCInitStruct->OCMode); /* Set the Output Compare Polarity */ MODIFY_REG(tmpccer, TIM_CCER_CC3P, TIM_OCInitStruct->OCPolarity << 8U); /* Set the Output State */ MODIFY_REG(tmpccer, TIM_CCER_CC3E, TIM_OCInitStruct->OCState << 8U); /* Write to TIMx CR2 */ LL_TIM_WriteReg(TIMx, CR2, tmpcr2); /* Write to TIMx CCMR2 */ LL_TIM_WriteReg(TIMx, CCMR2, tmpccmr2); /* Set the Capture Compare Register value */ LL_TIM_OC_SetCompareCH3(TIMx, TIM_OCInitStruct->CompareValue); /* Write to TIMx CCER */ LL_TIM_WriteReg(TIMx, CCER, tmpccer); return SUCCESS; } /** * @brief Configure the TIMx output channel 4. * @param TIMx Timer Instance * @param TIM_OCInitStruct pointer to the the TIMx output channel 4 configuration data structure * @retval An ErrorStatus enumeration value: * - SUCCESS: TIMx registers are de-initialized * - ERROR: not applicable */ static ErrorStatus OC4Config(TIM_TypeDef *TIMx, LL_TIM_OC_InitTypeDef *TIM_OCInitStruct) { uint32_t tmpccmr2; uint32_t tmpccer; uint32_t tmpcr2; /* Check the parameters */ assert_param(IS_TIM_CC4_INSTANCE(TIMx)); assert_param(IS_LL_TIM_OCMODE(TIM_OCInitStruct->OCMode)); assert_param(IS_LL_TIM_OCSTATE(TIM_OCInitStruct->OCState)); assert_param(IS_LL_TIM_OCPOLARITY(TIM_OCInitStruct->OCPolarity)); /* Disable the Channel 4: Reset the CC4E Bit */ CLEAR_BIT(TIMx->CCER, TIM_CCER_CC4E); /* Get the TIMx CCER register value */ tmpccer = LL_TIM_ReadReg(TIMx, CCER); /* Get the TIMx CR2 register value */ tmpcr2 = LL_TIM_ReadReg(TIMx, CR2); /* Get the TIMx CCMR2 register value */ tmpccmr2 = LL_TIM_ReadReg(TIMx, CCMR2); /* Reset Capture/Compare selection Bits */ CLEAR_BIT(tmpccmr2, TIM_CCMR2_CC4S); /* Select the Output Compare Mode */ MODIFY_REG(tmpccmr2, TIM_CCMR2_OC4M, TIM_OCInitStruct->OCMode << 8U); /* Set the Output Compare Polarity */ MODIFY_REG(tmpccer, TIM_CCER_CC4P, TIM_OCInitStruct->OCPolarity << 12U); /* Set the Output State */ MODIFY_REG(tmpccer, TIM_CCER_CC4E, TIM_OCInitStruct->OCState << 12U); /* Write to TIMx CR2 */ LL_TIM_WriteReg(TIMx, CR2, tmpcr2); /* Write to TIMx CCMR2 */ LL_TIM_WriteReg(TIMx, CCMR2, tmpccmr2); /* Set the Capture Compare Register value */ LL_TIM_OC_SetCompareCH4(TIMx, TIM_OCInitStruct->CompareValue); /* Write to TIMx CCER */ LL_TIM_WriteReg(TIMx, CCER, tmpccer); return SUCCESS; } /** * @brief Configure the TIMx input channel 1. * @param TIMx Timer Instance * @param TIM_ICInitStruct pointer to the the TIMx input channel 1 configuration data structure * @retval An ErrorStatus enumeration value: * - SUCCESS: TIMx registers are de-initialized * - ERROR: not applicable */ static ErrorStatus IC1Config(TIM_TypeDef *TIMx, LL_TIM_IC_InitTypeDef *TIM_ICInitStruct) { /* Check the parameters */ assert_param(IS_TIM_CC1_INSTANCE(TIMx)); assert_param(IS_LL_TIM_IC_POLARITY(TIM_ICInitStruct->ICPolarity)); assert_param(IS_LL_TIM_ACTIVEINPUT(TIM_ICInitStruct->ICActiveInput)); assert_param(IS_LL_TIM_ICPSC(TIM_ICInitStruct->ICPrescaler)); assert_param(IS_LL_TIM_IC_FILTER(TIM_ICInitStruct->ICFilter)); /* Disable the Channel 1: Reset the CC1E Bit */ TIMx->CCER &= (uint32_t)~TIM_CCER_CC1E; /* Select the Input and set the filter and the prescaler value */ MODIFY_REG(TIMx->CCMR1, (TIM_CCMR1_CC1S | TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC), (TIM_ICInitStruct->ICActiveInput | TIM_ICInitStruct->ICFilter | TIM_ICInitStruct->ICPrescaler) >> 16U); /* Select the Polarity and set the CC1E Bit */ MODIFY_REG(TIMx->CCER, (TIM_CCER_CC1P | TIM_CCER_CC1NP), (TIM_ICInitStruct->ICPolarity | TIM_CCER_CC1E)); return SUCCESS; } /** * @brief Configure the TIMx input channel 2. * @param TIMx Timer Instance * @param TIM_ICInitStruct pointer to the the TIMx input channel 2 configuration data structure * @retval An ErrorStatus enumeration value: * - SUCCESS: TIMx registers are de-initialized * - ERROR: not applicable */ static ErrorStatus IC2Config(TIM_TypeDef *TIMx, LL_TIM_IC_InitTypeDef *TIM_ICInitStruct) { /* Check the parameters */ assert_param(IS_TIM_CC2_INSTANCE(TIMx)); assert_param(IS_LL_TIM_IC_POLARITY(TIM_ICInitStruct->ICPolarity)); assert_param(IS_LL_TIM_ACTIVEINPUT(TIM_ICInitStruct->ICActiveInput)); assert_param(IS_LL_TIM_ICPSC(TIM_ICInitStruct->ICPrescaler)); assert_param(IS_LL_TIM_IC_FILTER(TIM_ICInitStruct->ICFilter)); /* Disable the Channel 2: Reset the CC2E Bit */ TIMx->CCER &= (uint32_t)~TIM_CCER_CC2E; /* Select the Input and set the filter and the prescaler value */ MODIFY_REG(TIMx->CCMR1, (TIM_CCMR1_CC2S | TIM_CCMR1_IC2F | TIM_CCMR1_IC2PSC), (TIM_ICInitStruct->ICActiveInput | TIM_ICInitStruct->ICFilter | TIM_ICInitStruct->ICPrescaler) >> 8U); /* Select the Polarity and set the CC2E Bit */ MODIFY_REG(TIMx->CCER, (TIM_CCER_CC2P | TIM_CCER_CC2NP), ((TIM_ICInitStruct->ICPolarity << 4U) | TIM_CCER_CC2E)); return SUCCESS; } /** * @brief Configure the TIMx input channel 3. * @param TIMx Timer Instance * @param TIM_ICInitStruct pointer to the the TIMx input channel 3 configuration data structure * @retval An ErrorStatus enumeration value: * - SUCCESS: TIMx registers are de-initialized * - ERROR: not applicable */ static ErrorStatus IC3Config(TIM_TypeDef *TIMx, LL_TIM_IC_InitTypeDef *TIM_ICInitStruct) { /* Check the parameters */ assert_param(IS_TIM_CC3_INSTANCE(TIMx)); assert_param(IS_LL_TIM_IC_POLARITY(TIM_ICInitStruct->ICPolarity)); assert_param(IS_LL_TIM_ACTIVEINPUT(TIM_ICInitStruct->ICActiveInput)); assert_param(IS_LL_TIM_ICPSC(TIM_ICInitStruct->ICPrescaler)); assert_param(IS_LL_TIM_IC_FILTER(TIM_ICInitStruct->ICFilter)); /* Disable the Channel 3: Reset the CC3E Bit */ TIMx->CCER &= (uint32_t)~TIM_CCER_CC3E; /* Select the Input and set the filter and the prescaler value */ MODIFY_REG(TIMx->CCMR2, (TIM_CCMR2_CC3S | TIM_CCMR2_IC3F | TIM_CCMR2_IC3PSC), (TIM_ICInitStruct->ICActiveInput | TIM_ICInitStruct->ICFilter | TIM_ICInitStruct->ICPrescaler) >> 16U); /* Select the Polarity and set the CC3E Bit */ MODIFY_REG(TIMx->CCER, (TIM_CCER_CC3P | TIM_CCER_CC3NP), ((TIM_ICInitStruct->ICPolarity << 8U) | TIM_CCER_CC3E)); return SUCCESS; } /** * @brief Configure the TIMx input channel 4. * @param TIMx Timer Instance * @param TIM_ICInitStruct pointer to the the TIMx input channel 4 configuration data structure * @retval An ErrorStatus enumeration value: * - SUCCESS: TIMx registers are de-initialized * - ERROR: not applicable */ static ErrorStatus IC4Config(TIM_TypeDef *TIMx, LL_TIM_IC_InitTypeDef *TIM_ICInitStruct) { /* Check the parameters */ assert_param(IS_TIM_CC4_INSTANCE(TIMx)); assert_param(IS_LL_TIM_IC_POLARITY(TIM_ICInitStruct->ICPolarity)); assert_param(IS_LL_TIM_ACTIVEINPUT(TIM_ICInitStruct->ICActiveInput)); assert_param(IS_LL_TIM_ICPSC(TIM_ICInitStruct->ICPrescaler)); assert_param(IS_LL_TIM_IC_FILTER(TIM_ICInitStruct->ICFilter)); /* Disable the Channel 4: Reset the CC4E Bit */ TIMx->CCER &= (uint32_t)~TIM_CCER_CC4E; /* Select the Input and set the filter and the prescaler value */ MODIFY_REG(TIMx->CCMR2, (TIM_CCMR2_CC4S | TIM_CCMR2_IC4F | TIM_CCMR2_IC4PSC), (TIM_ICInitStruct->ICActiveInput | TIM_ICInitStruct->ICFilter | TIM_ICInitStruct->ICPrescaler) >> 8U); /* Select the Polarity and set the CC2E Bit */ MODIFY_REG(TIMx->CCER, (TIM_CCER_CC4P | TIM_CCER_CC4NP), ((TIM_ICInitStruct->ICPolarity << 12U) | TIM_CCER_CC4E)); return SUCCESS; } /** * @} */ /** * @} */ #endif /* TIM2 || TIM3 || TIM4 || TIM5 || TIM9 || TIM10 || TIM11 TIM6 || TIM7 */ /** * @} */ #endif /* USE_FULL_LL_DRIVER */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/