123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102 |
- /*
- * The MySensors Arduino library handles the wireless radio link and protocol
- * between your home built sensors/actuators and HA controller of choice.
- * The sensors forms a self healing radio network with optional repeaters. Each
- * repeater and gateway builds a routing tables in EEPROM which keeps track of the
- * network topology allowing messages to be routed to nodes.
- *
- * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
- * Copyright (C) 2013-2018 Sensnology AB
- * Full contributor list: https://github.com/mysensors/MySensors/graphs/contributors
- *
- * Documentation: http://www.mysensors.org
- * Support Forum: http://forum.mysensors.org
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- */
-
- #include <iostream>
- #include <cstdio>
- #include <unistd.h>
-
- // For more options run ./configure --help
-
- // Config file
- //#define MY_LINUX_CONFIG_FILE "/etc/mysensors.conf"
-
- // How many clients should be able to connect to this gateway (default 1)
- #define MY_GATEWAY_MAX_CLIENTS 10
-
- // Serial config
- // Enable this if you are using an Arduino connected to the USB
- //#define MY_LINUX_SERIAL_PORT "/dev/ttyUSB0"
- // Enable this if you need to connect to a controller running on the same device
- // You also need to define MY_LINUX_SERIAL_PORT above with the symlink name for the PTY device
- //#define MY_LINUX_SERIAL_IS_PTY
- // Grant access to the specified system group for the serial device
- //#define MY_LINUX_SERIAL_GROUPNAME "tty"
-
- // MQTT options
- //#define MY_CONTROLLER_IP_ADDRESS 192, 168, 178, 68
- //#define MY_PORT 1883
- //#define MY_MQTT_CLIENT_ID "mysensors-1"
- //#define MY_MQTT_PUBLISH_TOPIC_PREFIX "mygateway1-out"
- //#define MY_MQTT_SUBSCRIBE_TOPIC_PREFIX "mygateway1-in"
-
- // Enable these if your MQTT broker requires username/password
- //#define MY_MQTT_USER "username"
- //#define MY_MQTT_PASSWORD "password"
-
- // Flash leds on rx/tx/err
- //#define MY_DEFAULT_ERR_LED_PIN 12 // Error LED pin
- //#define MY_DEFAULT_RX_LED_PIN 16 // Receive LED pin
- //#define MY_DEFAULT_TX_LED_PIN 18 // Transmit LED pin
- // Inverse the blinking feature
- //#define MY_WITH_LEDS_BLINKING_INVERSE
-
- // Enable software signing
- //#define MY_SIGNING_SOFT
- // Enable signing related debug
- //#define MY_DEBUG_VERBOSE_SIGNING
- // Enable this to request signatures
- //#define MY_SIGNING_REQUEST_SIGNATURES
- // Enable this to to weaken security for gradual deployment purpose
- // (see signing documentation for details)
- //#define MY_SIGNING_WEAK_SECURITY
-
- // Enables RF24 encryption (all nodes and gateway must have this enabled, and all must be
- // personalized with the same AES key)
- //#define MY_RF24_ENABLE_ENCRYPTION
-
- // Enable inclusion mode if your HA Controller supports it (e.g. Vera Controller)
- //#define MY_INCLUSION_MODE_FEATURE
- // Enable Inclusion mode button on gateway
- //#define MY_INCLUSION_BUTTON_FEATURE
- // Set inclusion mode duration (in seconds)
- //#define MY_INCLUSION_MODE_DURATION 60
- // Digital pin used for inclusion mode button
- //#define MY_INCLUSION_MODE_BUTTON_PIN 3
-
- #include <MySensors.h>
-
- #define ARDUINO 100
- // This space is intended to be used to include arduino libraries
-
- #undef ARDUINO
-
- void setup()
- {
- // Setup locally attached sensors
- }
-
- void presentation()
- {
- // Present locally attached sensors here
- }
-
- void loop()
- {
- // Send locally attached sensors data here
- }
|