initial commit

.gitignore

@@ -0,0 +1,7 @@
+.pio
+.vscode/.browse.c_cpp.db*
+.vscode/c_cpp_properties.json
+.vscode/launch.json
+.vscode/ipch
+include/creds.h
+blink

.vscode/extensions.json

@@ -0,0 +1,7 @@
+{
+    // See http://go.microsoft.com/fwlink/?LinkId=827846
+    // for the documentation about the extensions.json format
+    "recommendations": [
+        "platformio.platformio-ide"
+    ]
+}

README.md

@@ -1,3 +1,127 @@
-# OTA_SmartHome_Vortrag
+# step by step guide
 
-Step by step guide
+__start with [ArduinoOTA basic example](https://github.com/esp8266/Arduino/blob/master/libraries/ArduinoOTA/examples/BasicOTA/BasicOTA.ino)__
+
+```cpp
+void setup() {
+  WiFi.mode(WIFI_STA);
+  WiFi.begin(ssid, password);
+  while (WiFi.waitForConnectResult() != WL_CONNECTED) {
+    delay(5000);
+    ESP.restart();  /* reload application */
+  }
+
+  /* register callbacks for OTA events */
+  ArduinoOTA.onStart([]() { /* ... */ });
+  ArduinoOTA.onEnd  ([]() { /* ... */ });
+  ArduinoOTA.onError([](ota_error_t error) { /* ... */ });
+
+  /* setup OTA for listening on default UDP-port 8266 */
+  ArduinoOTA.begin();
+}
+
+void loop() {
+  /* check for incoming OTA update */
+  ArduinoOTA.handle();
+}
+```
+
+___
+
+modify __platformio.ini__
+
+```ini
+; example platformio.ini
+[env:esp01_1m]
+platform = espressif8266
+board = esp01_1m
+framework = arduino
+
+upload_port = COM6
+monitor_speed = 74880
+```
+
+___
+
+__open serial port to esp8266 and reset__
+
+```bash
+# example output after reset
+ets Jan  8 2013,rst cause:2, boot mode:(3,7)
+
+# load binary
+load 0x4010f000, len 3460, room 16
+tail 4
+chksum 0xcc
+load 0x3fff20b8, len 40, room 4
+tail 4
+chksum 0xc9
+csum 0xc9
+v00040b70
+~ld
+```
+___
+
+__Boot Messages and Modes, see also [detailed documentation](https://github.com/esp8266/Arduino/blob/master/doc/boards.rst)__
+
+at startup the ESP prints out the current boot mode example:
+```
+rst cause:2, boot mode:(3,6)
+```
+
+| rst cause| Description      |
+|----------|------------------|
+| 0        | unknown          |
+| 1        | normal boot      |
+| 2        | reset pin        |
+| 3        | software reset   |
+| 4        | watchdog reset   |
+
+```
+boot mode:(x,y)
+```
+
+| x        | GPIO15   | GPIO0   | GPIO2   | Mode        |
+|----------|----------|---------|---------|-------------|
+| 1        | 0V       | 0V      | 3.3V    | Uart        |
+| 3        | 0V       | 3.3V    | 3.3V    | Flash       |
+
+__note:__ __y__ represents the position of the boot file
+
+___
+
+__Upload compiled binary via uart__
+
+__note__: close serial port
+
+```bash
+$ pio run -t upload
+# or use upload button in vscode
+```
+
+__open serial port to esp8266 and check Wi-Fi connection__
+
+monitor output:
+```bash
+Ready
+IP address: 192.168.10.108
+```
+__modify platformio.ini accordingly__
+```ini
+; new platformio.ini for OTA
+[env:esp01_1m]
+platform = espressif8266
+board = esp01_1m
+framework = arduino
+
+upload_protocol = espota
+upload_port = 192.168.10.108
+monitor_speed = 74880
+```
+___
+
+Process of updating
+
+![ota flash layout](ota_flash.png)
+
+code for updating

debug_ser.py

@@ -0,0 +1,17 @@
+import serial
+
+with serial.Serial(port='COM6', timeout=1) as ser:
+    ser.baudrate = 74880
+    
+    while True:
+        msg = ser.readline()
+        if msg:
+            try:
+                print(msg.decode(), flush=True, sep='' ,end='')
+            except:
+                pass
+
+            if msg == b'ld\r\n':
+                ser.baudrate = 74880
+            if msg == b'[OTA] End\r\n':
+                ser.baudrate = 115200

include/creds_override.h

@@ -0,0 +1,4 @@
+#ifndef STASSID
+#define STASSID "your ssid"
+#define STAPSK  "your password"
+#endif

lib/README

@@ -0,0 +1,46 @@
+
+This directory is intended for project specific (private) libraries.
+PlatformIO will compile them to static libraries and link into executable file.
+
+The source code of each library should be placed in a an own separate directory
+("lib/your_library_name/[here are source files]").
+
+For example, see a structure of the following two libraries `Foo` and `Bar`:
+
+|--lib
+|  |
+|  |--Bar
+|  |  |--docs
+|  |  |--examples
+|  |  |--src
+|  |     |- Bar.c
+|  |     |- Bar.h
+|  |  |- library.json (optional, custom build options, etc) https://docs.platformio.org/page/librarymanager/config.html
+|  |
+|  |--Foo
+|  |  |- Foo.c
+|  |  |- Foo.h
+|  |
+|  |- README --> THIS FILE
+|
+|- platformio.ini
+|--src
+   |- main.c
+
+and a contents of `src/main.c`:
+```
+#include <Foo.h>
+#include <Bar.h>
+
+int main (void)
+{
+  ...
+}
+
+```
+
+PlatformIO Library Dependency Finder will find automatically dependent
+libraries scanning project source files.
+
+More information about PlatformIO Library Dependency Finder
+- https://docs.platformio.org/page/librarymanager/ldf.html

platformio.ini

@@ -0,0 +1,18 @@
+; PlatformIO Project Configuration File
+;
+;   Build options: build flags, source filter
+;   Upload options: custom upload port, speed and extra flags
+;   Library options: dependencies, extra library storages
+;   Advanced options: extra scripting
+;
+; Please visit documentation for the other options and examples
+; https://docs.platformio.org/page/projectconf.html
+
+[env:esp01_1m]
+platform = espressif8266
+board = esp01_1m
+framework = arduino
+
+upload_protocol = espota
+upload_port = 192.168.10.108
+monitor_speed = 74880

src/main.cpp

@@ -0,0 +1,120 @@
+#include <Arduino.h>
+
+#include <ESP8266WiFi.h>
+#include <WiFiUdp.h>
+#include <ArduinoOTA.h>
+#include "eboot_command.h"
+#include "creds.h"
+
+const char* ssid = STASSID;
+const char* password = STAPSK;
+
+WiFiServer server(80);
+
+void ota_setup() {
+  ArduinoOTA.onStart([]() {
+    Serial.flush();
+    Serial.begin(74880);
+    Serial.flush();
+    String type;
+    if (ArduinoOTA.getCommand() == U_FLASH) {
+      type = "sketch";
+    } else { // U_FS
+      type = "filesystem";
+    }
+    // NOTE: if updating FS this would be the place to unmount FS using FS.end()
+    Serial.println("[OTA] Start updating " + type);
+  });
+  ArduinoOTA.onEnd([]() {
+    Serial.println("\n[OTA] End");
+  });
+  ArduinoOTA.onProgress([](unsigned int progress, unsigned int total) {
+    Serial.printf("[OTA] Progress: %u%%\r", (progress / (total / 100)));
+  });
+  ArduinoOTA.onError([](ota_error_t error) {
+    Serial.printf("[OTA] Error[%u]: ", error);
+    if (error == OTA_AUTH_ERROR) {
+      Serial.println("[OTA] Auth Failed");
+    } else if (error == OTA_BEGIN_ERROR) {
+      Serial.println("[OTA] Begin Failed");
+    } else if (error == OTA_CONNECT_ERROR) {
+      Serial.println("[OTA] Connect Failed");
+    } else if (error == OTA_RECEIVE_ERROR) {
+      Serial.println("[OTA] Receive Failed");
+    } else if (error == OTA_END_ERROR) {
+      Serial.println("[OTA] End Failed");
+    }
+  });
+}
+
+void setup() {
+  Serial.begin(74880);
+  Serial.println("\n[Program] Booting");
+
+  WiFi.mode(WIFI_STA);
+  WiFi.begin(ssid, password);
+  while (WiFi.waitForConnectResult() != WL_CONNECTED) {
+    Serial.println("[Program] Connection Failed! Rebooting...");
+    delay(5000);
+    ESP.restart();
+  }
+
+  ota_setup();
+  ArduinoOTA.begin();
+  server.begin();
+  
+  Serial.printf("[Program] OTA and HTTPServer ready !\r\n");
+  Serial.printf("[Program] IP address: ");
+  Serial.println(WiFi.localIP());
+  
+  Serial.flush();
+  Serial.begin(9600);
+  Serial.flush();
+}
+
+int value = 0;
+void client_handler(WiFiClient* cl) {
+  String currentLine = "";
+  while (cl->connected()) {
+    if (cl->available()) {
+      char c = cl->read();
+      Serial.write(c);
+      if (c == '\n') {
+        if (currentLine.length() == 0) {
+          cl->println("HTTP/1.1 200 OK");
+          cl->println("Content-type:text/html");
+          cl->println();
+          cl->print("Relais <a href=\"/H\">Einschalten</a><br>");
+          cl->print("Relais <a href=\"/L\">Ausschalten</a><br>");
+          cl->println();
+          break;
+        } else {
+          currentLine = "";
+        }
+      } else if (c != '\r') { 
+        currentLine += c;
+      }
+      if (currentLine.endsWith("GET /H")) {
+        Serial.println("EIN");
+        delay(10);
+        byte close[] = {0xA0, 0x01, 0x01, 0xA2};
+        Serial.write(close, sizeof(close));
+      }
+      if (currentLine.endsWith("GET /L")) {
+        Serial.println("AUS");
+        delay(10);
+        byte open[] = {0xA0, 0x01, 0x00, 0xA1};
+        Serial.write(open, sizeof(open));
+      }
+    }
+  }
+  cl->stop();
+}
+
+void loop() {
+  ArduinoOTA.handle();
+  WiFiClient client = server.available();
+  if (client) {
+    client_handler(&client);
+  }
+}

test/README

@@ -0,0 +1,11 @@
+
+This directory is intended for PlatformIO Unit Testing and project tests.
+
+Unit Testing is a software testing method by which individual units of
+source code, sets of one or more MCU program modules together with associated
+control data, usage procedures, and operating procedures, are tested to
+determine whether they are fit for use. Unit testing finds problems early
+in the development cycle.
+
+More information about PlatformIO Unit Testing:
+- https://docs.platformio.org/page/plus/unit-testing.html